Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: BSOD 0x0000000A




  1. #1
    Join Date
    Jan 2014
    Location
    St. Louis
    Posts
    1

    Default BSOD 0x0000000A

    getting this BSOD when installing Windows 2K3, now I tested a few drives, even connected one with WIndows XP and that did come up. But a drive with Windows 2K bombs out int he begining with BSOD inaccessible boot device. I am trying to install a clean Windows 2K3 on a drive that was formatted and clean. It gets to the later stages of the setup and at the same point everytime the setup goes to restart it bombs out with BSDO 0x0000000A IRQL less than or not equal. I am thinking this must be something with the BIOS, overclocking or memory caching. Please Help me.

  2. #2
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: BSOD 0x0000000A

    You're installing an OS while overclocked? Good luck with that.
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  3. #3
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Location
    Third stone from the sun
    Posts
    4,824

    Default Re: BSOD 0x0000000A

    Quote Originally Posted by kitprice View Post
    getting this BSOD when installing Windows 2K3, now I tested a few drives, even connected one with WIndows XP and that did come up. But a drive with Windows 2K bombs out int he begining with BSOD inaccessible boot device. I am trying to install a clean Windows 2K3 on a drive that was formatted and clean. It gets to the later stages of the setup and at the same point everytime the setup goes to restart it bombs out with BSDO 0x0000000A IRQL less than or not equal. I am thinking this must be something with the BIOS, overclocking or memory caching. Please Help me.
    It might help if we knew what mother board you are using, and the drives as well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •