Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 76

Thread: FM2A88X+ Fatality RAM won't run beyond 1600




  1. #51
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Quote Originally Posted by ASCI Blue View Post
    1.4 volts for the CPU?? :O What's your nb voltage set to?
    Heh, I take it by your ":O" you don't know what that value, 1.45v, represents.

    Might I suggest you pull your "Multiplier/Voltage Change" from Auto to Manual in the BIOSes OC Tweaker page, then report back what your "CPU Voltage" shows. Or in A-Tunings OC Tweaker tab, as it's displayed there too.

    CPU/NB GFX Voltage: 1.35000, looking at it just now in A-Tuning

    Again, these are all stock values for my FM2A88X Extreme6+ and A10-6800K while using BIOS 2.70.

  2. #52
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Quote Originally Posted by - wardog - View Post
    Might I suggest you pull your "Multiplier/Voltage Change" from Auto to Manual in the BIOSes OC Tweaker page, then report back what your "CPU Voltage" shows. Or in A-Tunings OC Tweaker tab, as it's displayed there too.
    That is, as Stock values. Before any changes made by you.

  3. #53
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Today in reading some posts scattered across the 'net concerning Kaveri and your Killer board, you want to try something there? I don't know why this might help at 2133 stock but some posts indicate it indeed does. Worth a shot but watch your temps while doing so if you choose.

    BIOS > OC Tweaker - "APU PCIE Voltage VDDP" , your screenies show it at 1.052V, best I can tell is this boards BIOS Default(and incorrect?!?), bump this to 1.160V and retry. HERE is where to jump in and begin reading Spectrum Legacy's posts. Must thank them for their thorough posts while troubleshooting there.

    EDIT: I chose to link Spectrum Legacy's posts as most of the dozen or or so tabs I had open in my browser the posts only showed images and or fleeting references. Spectrum Legacy's on the other had, well, his post there concerning this does an excellent job at describing the steps taken and the results of each test to come to that conclusion. My hat's off to him.
    Last edited by - wardog -; 04-01-2014 at 05:39 AM.

  4. #54
    Join Date
    Mar 2014
    Location
    in an apartment
    Posts
    36

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    I know what it meant but yours is higher than a kite. Mine is 1.2 something. Kaveri is pretty impressive power wise, a 95 watt chip plus smaller die. I think my NB is set to 1.0XX too keep in mind all my settings are stock.

    I know Spectrum, I'm on 49 or 50 in that thread. :D

  5. #55
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Quote Originally Posted by ASCI Blue View Post
    I know Spectrum, I'm on 49 or 50 in that thread. :D
    Why there you are indeed. And yet again a few caffeine fueled pages ahead of me, still.

    ROTFLMAO, no kidding? You bumped it to 133? PHHHhhhheewwwwwww hahahahaha did I say I was ROTFLMAO ............

    I for a reason didn't touch that when you asked here of it as I knew you'd find the answer out immediately after trying. ROTFLMAO

    Time to wipe the blackboard clean and begin anew.

  6. #56
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Seriously now, all joking aside. Send that memory back for one of the 2133 kits shown on G.Skills RAM Configurator results when you key in the proper asked for items at the top of it's page.

    Matt hasn't answered there and times getting on for you to exchange it with/for some KNOWN compatible memory. End this nonsense you're putting yourself though.

  7. #57
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Oh BTW, as Abyssmal said and Spectrum Legacy hinted at on his post 188 "It also affects your sata, usb and other controllers". That 133 may well have corrupted your OS install.

  8. #58
    Join Date
    Mar 2014
    Location
    in an apartment
    Posts
    36

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    I've searched the 'egg for most to all those kits with no success. :/ The closest comparable is the F3-2133XXXXXXX and I can't seem to find it anywhere. What's almost worse an ASRock rep told me to RMA the board. :/

  9. #59
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Quote Originally Posted by ASCI Blue View Post
    ........an ASRock rep told me to RMA the board. :/
    Yea, tough call there which one, or both.

  10. #60
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: FM2A88X+ Fatality RAM won't run beyond 1600

    Quote Originally Posted by ASCI Blue View Post
    I've searched the 'egg for most to all those kits with no success. :/
    C'mon. I just checked the top three listed 8GB(2x4GB) kits listed under the 2133 listings. What are you entering there on the Configurator?

    ASRock | AMD Socket FM2+ A88X/A78 for Socket FM2+ | Fatal1ty FM2A88X+ Killer

    On the 'Egg off the G.Skill list: (double check me before ordering, cross-check me using the Configurator yourself again)

    [Sniper] F3-17000CL9D-8GBSR - G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBSR - Newegg.com

    [RipjawsX] F3-17000CL9D-8GBXM - G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBXM - Newegg.com

    [Ares] F3-2133C10D-8GAB - Newegg.com - G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GAB

    [Sniper] F3-2133C10D-8GSR - Newegg.com - G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GSR

    and possibly more listed at the 'Egg but I quit after checking the first four 8GB kits.
    Last edited by - wardog -; 04-01-2014 at 11:45 AM.

Page 6 of 8 FirstFirst ... 45678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •