Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: q1900b-itx won't start with ram in the slot DDR3_B1 only.




  1. #1
    Join Date
    Jun 2014
    Location
    wonderland
    Posts
    1

    Question q1900b-itx won't start with ram in the slot DDR3_B1 only.

    I haven't tried it with the two slots being filled because I don't have a second piece of ram around. Do I get a defective one or it's just designed that way (Everything is fine with ram in the slot DDR3_A1 only).
    Last edited by bobren; 06-02-2014 at 11:42 PM.

  2. #2
    vuldin is offline Junior Member
    Join Date
    May 2014
    Location
    Seattle
    Posts
    70

    Default Re: q1900b-itx won't start with ram in the slot DDR3_B1 only.

    Neither the manual nor the installation guide for that board mentions the correct slot to start with when installing memory, but its safe to assume that it's best to start with DDR3_A1. Other boards do have a recommended installation pattern to follow when installing multiple modules though, so maybe this wasn't mentioned in the docs but still applies. One thing to check is the memory module by running memtest86+. Does the module pass when in slot DDR3_A1? The other thing is to ensure the memory is on the recommended memory list.

    Maybe someone else knows for sure whether this board supports a single memory module in DDR3_B1.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •