Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Fatal1ty Z77 & DDR3 . problems and help

  1. #1
    Join Date
    Jul 2014

    Default Fatal1ty Z77 & DDR3 . problems and help

    Hi, Iīll try to explain it as best as I can.

    I have an Asrock Fatal1ty Z77 with 6 GB DDR3. I bought another 8 GB. Itīs (value ram) kingston KVR1333D3N9. But it doesnīt work. It beeps 3 short beeps. looking for it, says ... problems with first 64 kb.

    Iīve been reading and looking for, and I found that this motherboard, works with same RAM, but KVR1333D3N9H. Yes ... itīs not the same.... but it only means (I guess) that this memory is STR (Self Temperature Refreshing)

    I thought to reset mb but someone told me that if I reset my mb and doesnīt work with my new RAM, wonīt work with the old memory. It sounds extraņe, so better ask this question before doing anything.

    If anyone could help me ... it would be great.


  2. #2
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Third stone from the sun

    Default Re: Fatal1ty Z77 & DDR3 . problems and help

    Resetting the board/BIOS will not cause the board to not work with your old memory, if it worked in the past, it should work now, or after a reset.

    But my question is, are you mixing your old and new memory together in the board at the same time? If so, and your old memory is not the same model as the new memory, that is probably the reason you get the error beeps when you start the PC. You cannot mix different models of DDR3 memory in a board and expect it to work, it won't.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts