Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: ASRock H81 Pro BTC Question




  1. #1
    Join Date
    Sep 2014
    Location
    NC
    Posts
    1

    Default ASRock H81 Pro BTC Question

    So I get a warning screen after resetting CMOS (Bios P 1.50) that says "Warning be sure both 4 pin Molex are connected"
    Ok, is this an actual detection feature of the board that's telling me something is wrong on the board?
    Or is it just a per-programed warning screen reminder?

    I have both 4 pin Molex connectors plugged into the board. Also have the 8 pin and ATX plugged in as well.

    Need to know if I have a bad board or is this just a heads up message?

    Any help is appreciated.

  2. #2
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Location
    Third stone from the sun
    Posts
    4,824

    Default Re: ASRock H81 Pro BTC Question

    That message must be a pre-programmed message, given what is shown in the overview for this board.

    ASRock H81 Pro BTC Question-h81btc-info-jpg

    Note that the above states you may use only one four pin molex connector in the jack closest to the PCIe slots if you are unable to supply two molex power connectors.

    If you only see the message after clearing the BIOS, that tells me it is just a heads up message.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •