Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: ASRock X99 Extreme 6 3.1 - Driver Question




  1. #1
    Join Date
    Apr 2011
    Location
    Philadelphia, PA
    Posts
    71

    Question ASRock X99 Extreme 6 3.1 - Driver Question

    Hi everyone,

    I hope you are well. When it comes to drivers I am a bit OCD and I am running into an issue with the ASRock Extreme 6 3.1 where I am unsure which driver to use for the board. In device manager, under IDE ATA/ATAPI controllers it appears that windows is using the default "standard" driver. I believe that I can use an Intel RST driver here instead of the default. When I manually select the inf during the driver install it still defaults to the standard driver. I know I can manually select the driver to use but am unsure which one to use.

    TL;DR - What driver should I be using for my IDE ATA/ATAPI controller when selecting manually from the Intel RST driver INF?

    Thank you.

  2. #2
    SandsOfTime is offline Member
    Join Date
    Jul 2014
    Location
    Germany
    Posts
    143

    Default Re: ASRock X99 Extreme 6 3.1 - Driver Question

    The Intel RST driver is only for sata ports running in AHCI and RAID mode. For sata ports in IDE mode or the legacy IDE ATA/ATAPI controllers (with 40-pin ribbon cable) there is only the "standard" driver.
    Last edited by SandsOfTime; 07-16-2015 at 05:25 PM.
    ---
    Mind is not cumulative, but stupidity is.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •