Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: I need help- Fatal1ty Z97 Killer




  1. #1
    Join Date
    Oct 2014
    Location
    Pittsburg, CA
    Posts
    3

    Question I need help- Fatal1ty Z97 Killer

    It would seem that the only time the USB KB/Mouse are active before POST is when the BIOS have been reset... Once the BIOS have be setup and saved, the USB KB will never be active to revisit the setup program... Pressing F2 or Delete does nothing and OS loads, then the KB/Mouse are fine...

    I need to get into setup, but without a KB it's impossible... resetting BIOS seems like a lame duck... I've updated BIOS to 2.10 and I does the same thing...

    I am using a KVM 4 port Linkskey and have talked with them about it, they said it's a USB 2.0 no brainer, so I moved the link from a 3.0 to a 2.0 port, same thing...

    I've reset the BIOS so many times trying any USB setting change to no avail. I have even tried a second KB bypassing the KVM altogether, still no KB prior to POST.

    On a secondary problem, when I put the computer to sleep, the KVM is never active again, I must unplug power and all USB ports to get it working again.

    Any suggestions?

  2. #2
    Join Date
    Jan 2016
    Location
    TAIWAN
    Posts
    18

    Default Re: I need help- Fatal1ty Z97 Killer

    Dear AsRockGuy,
    I am ASRock TSD Danny.

    For your case, we provide few ways for you to try.
    1.Please load BIOS default for try.
    2.Please remove the KVM for verify.
    3.Please update KVM firmware for try.
    4.If possible, please connect KVM to other system for verify.

    Have a great day !
    ASRock TSD Danny

  3. #3
    Join Date
    Oct 2014
    Location
    Pittsburg, CA
    Posts
    3

    Thumbs up Re: I need help- Fatal1ty Z97 Killer

    Quote Originally Posted by ASROCK-TSD-Danny View Post
    Dear AsRockGuy,
    I am ASRock TSD Danny.

    For your case, we provide few ways for you to try.
    1.Please load BIOS default for try.
    2.Please remove the KVM for verify.
    3.Please update KVM firmware for try.
    4.If possible, please connect KVM to other system for verify.

    Have a great day !
    ASRock TSD Danny
    Hello Danny, thanks for responding, Yes, I've tried all your suggestion's before and have since found a solution. Under BIOS setup>USB I tried setting the patch for USB to enabled, now the kb is active during POST and all USB are active after sleep or hibernation when resumed...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •