Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: New PC - no display on a screen, 3 beeps

  1. #1
    Join Date
    Oct 2016

    Thumbs down New PC - no display on a screen, 3 beeps

    I bought and built a new computer. And when I power it on, the speaker only makes beep-beep-beep
    beep-beep-beep (3 beeps) and it is still repeating. I really do not know how to fix it and I will be very greatful, if you could help me.
    ASRock B150M PRO4S

    Intel Core i3-6100

    GIGABYTE Radeon RX 460, 2GB GDDR5

    WD Blue EX - 1TB

    Crucial 8GB DDR4 2133, Dual Ranked

    Corsair CX Builder Series 430W


  2. #2
    profJim's Avatar
    profJim is offline Chief Munchkin + moderator
    Join Date
    Dec 2008
    Tacoma, WA. [USA]

    Default Re: New PC - no display on a screen, 3 beeps

    Welcome to the forum.

    Your problem might be with one or both of your memory modules.

    From AMI Bios Beepcodes:

    AMI Beep Codes

    3 short beeps ---> Base 64K memory failure ---> A memory failure has occurred in the first 64K of RAM. The RAM IC is probably bad

    Is the memory kit's part number listed by ASRock as compatible with your motherboard?
    Does Crucial list your specific memory kit as compatible with your motherboard?
    If your memory kit is listed by ASRock or Crucial as compatible, see if your system boots OK with only one memory module installed.

    Are each of the memory modules properly seated in the correct memory slots?
    Is there any dirt or damage to the memory module's electrical contacts or the memory slots?

    You might need to test with only one memory module at a time that is inserted in the correct motherboard memory slot.

    Never remove or install any hardware in your system while the power supply's A.C. power cord is connected to the psu and the wall outlet.

    After your system is turned off, unplug the psu A.C. power cord from the wall outlet and then press and hold the front panel on/off switch for 20 seconds to discharge residual power in your system.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts