Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: X99 WS-E/10G with Ripjaws DDR43200 (F4-3200C16D-32GVK) - error 55

  1. #1
    jgrean is offline Junior Member
    Join Date
    Dec 2016

    Default X99 WS-E/10G with Ripjaws DDR43200 (F4-3200C16D-32GVK) - error 55

    As the title says, I'm having a 55 error code with the following memory:
    G.Skill Ripjaws V 32GB (2X16GB) DDR4-3200 Desktop Memory - F4-3200C16D-32GVK
    I bought two of these sets for 64gb of RAM.
    It's not on the supported memory list, but the specs match the specs of the motherboard, as far as I can tell?
    ASRock > X99 WS-E/10G
    On the main page for the mobo, it says, "Supports Quad Channel DDR4 3200+(OC), with maximum capacity up to 128GB"
    Then you go to the RAM compatibility page, and it shows, for GSkill: 2133, 2400, 2666, 2800.
    Contradicts itself.
    ASRock > X99 WS-E/10G

    I've double checked I am using the correct slots out of the 8. A1, B1, C1, D1. I have tried combinations of 1-4 modules, including each of the 4 modules on their own. Always error 55.

    Can someone tell me where I am going wrong?


    BIOS p1.8
    Corsair H110i
    3x EVGA 1070 Hybrid
    WD Red Pro 6tb
    Last edited by jgrean; 12-15-2016 at 10:54 AM. Reason: Additional Info provided, link to Specs

  2. #2
    Join Date
    Dec 2016

    Default Re: X99 WS-E/10G with Ripjaws DDR43200 (F4-3200C16D-32GVK) - error 55

    Dear jgrean,
    This is Michael from ASRock Technical support Team.

    For this case, we did the test at our side.
    We installed G.Skill F4-3200C16Q-64GVK (DDR4-3200 16GBx4) memory on X99WS-E/10G with P3.20
    It works properly in the system.
    Your memory F4-3200C16D-32GVK (DDR4-3200 16GBx2) are two sticks per set.
    Our memory are four sticks per set, so itís the same module.

    We provide following suggestions for trying:
    1. Please refer to user manual to clear CMOS.
    2. Only install one stick memory on each DIMM slot (A1/B1/C1/D1) to try.
    3. Please check if CPU socket is pin-bend and re-install CPU to try.
    Because the memory controller is in the CPU.
    4. Switch [BIOS Selection Switch] to another one.
    5. Please clean the golden finger of memory module.
    6. If possible, try different CPU and memory module.

    Thank you!

    Have a great day,
    ASRock TSD-Michael

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts