Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: r3e - vcore offset




  1. #1
    Join Date
    May 2009
    Posts
    43

    Default r3e - vcore offset

    I would like to know when the dynamic vid (vcore offset) will be available for r3e. is there any problem to add it?
    All boards from GB have this option.

    problem with BIOS 0010
    When I select BIOS FLASHBACK option then SWITCH BIOS BOOT FROM in the BIOS I get the following screen:

    For me the issue looks like a BIOS bug
    Last edited by jackpl; 08-24-2010 at 02:17 PM.
    i7 3930k, x79-UD5
    32GB (Corsair Dominator Platinum + Patriot XD2 )
    Asus GTX 670 OC DCUII

    Enermax 950W Revo., X-FI

    SS TJ07, LC (EK Supreme HF/NI, MCP655 + EK, RX480, other stuff)

  2. Default Re: r3e - vcore offset

    It sounds like you are using a beta BIOS. I would recommend using the latest official BIOS revision which is 0901. Regarding the offset vCore question, as of right now we have no plans of implementing this option. We asked a lot of users about their thoughts on having vCore offset and we did not get a lot of feedback. We did get feedback from the extreme community and most said that they did not utilize dynamic VID, and that they are more concerned with maintaining a more consistent voltage using absolute vCore. However, we do have 2 options for load-line calibration (50% and 100%) to give users more voltage control. So as of right now vCore offset will only be implemented in our mainstream board as well as the upcoming Rampage III Formula.
    Mason Winner
    ASUS Tech Support

  3. #3
    Join Date
    May 2009
    Posts
    43

    Default Re: r3e - vcore offset

    I am not an extreme overclocker, and this option would be useful for me. It is a pity that it will not be implemented.
    After several days of testing I can say that this board is probably not for me.
    -very low max bclk with 920 cpu - max 212,
    -cold boot issue, All seemed fine until complete power off over night. Motherboard will not boot after power is disconnected completely. overclocking failed - message.
    I miss the display, which shows the post codes.
    i7 3930k, x79-UD5
    32GB (Corsair Dominator Platinum + Patriot XD2 )
    Asus GTX 670 OC DCUII

    Enermax 950W Revo., X-FI

    SS TJ07, LC (EK Supreme HF/NI, MCP655 + EK, RX480, other stuff)

  4. #4

    Default Re: r3e - vcore offset

    if you wqant the best then get a Gigabyte X58A UD9

    then you will be playing with power
    Intel Core i7-980X Extreme Edition Gulftown cooled By Swiftech APOGEE GTZ CPU waterblock
    Gigabyte GA-X58A-UD9 Water Cooled
    Corsair Dominator 12GB (6 x 2GB) Model CMD12GX3M6A1600C8
    2 Gigabyte GTX 480 in SLI
    6 Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM in Raid 0
    2 Plextor sata Blu_ray Drives Model PX-B320SA
    Ultra X4 1200 Watt
    Thermaltake Armor+Thermaltake Bigwater 760 IS
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Creative Gigaworks 750S 7.1 Suround 700 watt
    Windows 7 Ultimate 64 bit

  5. Default Re: r3e - vcore offset

    Hello Jack,

    Please PM me with your e-mail address so I can get in contact with you and get your OC Profile. We are not seeing any vCore issues with BCLKs over 225 and there is not a cold bug issue with this board unlike the Gigabyte UD9.
    Mason Winner
    ASUS Tech Support

  6. #6
    Join Date
    May 2009
    Posts
    43

    Default Re: r3e - vcore offset

    I upgraded the BIOS to the latest version 1004 but that doesn't seem to help with bclk.
    I hit a wall here at 212.
    Last edited by jackpl; 09-06-2010 at 02:29 AM.
    i7 3930k, x79-UD5
    32GB (Corsair Dominator Platinum + Patriot XD2 )
    Asus GTX 670 OC DCUII

    Enermax 950W Revo., X-FI

    SS TJ07, LC (EK Supreme HF/NI, MCP655 + EK, RX480, other stuff)

  7. Default Re: r3e - vcore offset

    We're not having any issues getting above 212 BCLK here. What multiplier are you using and what kind of frequency are you trying to achieve?
    Mason Winner
    ASUS Tech Support

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •