Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: Can't get dual channel RAM to work?




  1. #1
    Join Date
    Feb 2011
    Location
    A house.
    Posts
    2

    Default Can't get dual channel RAM to work?

    My system won't post when I have both of my kingston HKX1600C8D3K2/4GX in the A2/B2 or A1/B1 slots. It will boot if I just have 1 of the 2gb sticks in B1 or A1. My motherboard is 880G Extreme3 from ASROCK. My processor is an AMD Phenom II x4

    When I put both sticks in the mobo led returns a D0(Go to flat mode with 4GB limit and GA20 enabled. Verify the bootblock checksum.)

    I've tried swapping the ram positions and changing some BIOS settings.
    Memory Controller Mode:unganged
    Bank Interleaving:Auto
    Channel Interleaving:Hash2
    CAS Latency:9
    TRCD:9
    TRP:9
    TRAS:27
    DRAM Voltage:~1.75
    Memory Clock:800Mhz DDR3_1600

    I'm afraid if I keep playing with BIOS settings and plugging/unplugging my RAM I'm going to break something, where am I going wrong here?

    Thanks
    Last edited by walkerb0h; 02-10-2011 at 08:46 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •