Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: acrylic




  1. #1
    Join Date
    Aug 2002
    Location
    tx usa
    Posts
    103

    Default

    what is the best way to cut an 8cm or 12cm fan hole into an acrylic case window? also what is the cheapest place to git a dremel?
    **LAPTOP**
    Core 2 Duo "Memron" T7500 (2.2ghz)
    Intel Crestline GL960/GM965/PM965
    4096mb DDR2-667 5-5-5-12
    NVIDIA Quadro FX 570M (512 MB)


  2. #2
    Join Date
    Aug 2002
    Location
    Ohio, USA
    Posts
    1,296

    Default

    Holesaw in a drillpress or steady hand with a cordless drill on low speed setting. Also clamp the acrylic to a piece of wood to keep the pilot drill stable.

  3. #3
    Join Date
    Mar 2003
    Posts
    208

    Default

    and use masking tape where you want to drill. it will help protect the lexan from accidental slips and scratches.
    Hope this helps
    Night

    _____________________________
    First name Middle init. Last .

  4. #4
    Join Date
    May 2002
    Posts
    101

    Default

    Yes, MAKE SURE YOU USE MASKING TAPE! I made a few scratches on my case making a blow hole before i thought about using masking tape. I can imagine it would be a lil worse on the acrylic.

  5. #5
    Join Date
    May 2003
    Posts
    42

    Default

    'Life is what you make of it'

    For system specs goto my webpage, and have a lookie under the 'pc specs' area

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •