Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Cheap PSU Cable Wrapping Mod




  1. Default

    Well, I got sick of looking at that mess of PSU wires inside my case, so I went out on the internet to find me some sleeving. After about an hour I realized it was way too expensive for its purpose (wrapping a cable) so I took things into my own hands. I went around the workshop and looked for something to wrap up my cables, and found the wonders of wonders, Electrical Tape. Although not the most aesthic option, it certainly served its purpose of tiding up the inside of my case and the black wrapping doesnt look to bad when looking at the case. Its alot better than a mess of tangles. Sow ithout Further ado... The PSU before Mod...
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  2. Default

    PSU after wrapping with electrical tape.
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  3. Default

    And coming up 2 pics of the case, now alot tidier, with even more increased airflow :smokin:
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  4. Default

    ...
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  5. #5
    Join Date
    Aug 2003
    Location
    Darwin, Australia
    Posts
    104

    Default

    doesn't electrical tape go really sticky if used in hot environments for lengthy periods of time?
    or did i just have **** tape :shrug:
    anyway... looks pretty good, hope the tape doesn't go sticky on you :thumb:
    P4 1.7ghz 100FSB @ 1.9ghz 112FSB
    Gigabyte GA-8IR533 Motherboard
    256mb Generic PC2100(DDR266) @ DDR298
    GeForce2 MX400 200/143 @ 225/178
    52x Sony CDROM
    52x24x52x LG Burner
    17" Panasonic CRT
    40GB Seagate HDD

  6. #6
    Join Date
    Apr 2002
    Posts
    3,141

    Default

    Lookin' good m8.. :thumb:

    If I ship my machine/s over can you fix em' to..?

    I'm a lazyass..

  7. Default

    The tape would start to loosen if it was heated up, but my case temp rarely sees more than 30C so I dont think Ill have to worry
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  8. Default

    Quote Originally Posted by The__tweaker
    Lookin' good m8.. :thumb:

    If I ship my machine/s over can you fix em' to..?

    I'm a lazyass..
    Sure, you get to pay the air shipping from Europe to US and back again :)
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  9. #9
    Join Date
    May 2003
    Posts
    306

    Default

    Why not use that thing like a twisted plastic thingy, i dont know how to describe it, but i got mine in Maplin shop here in UK.

    Its better than the electrical tape, because its not sticky.

  10. #10
    Join Date
    Jan 2003
    Posts
    790

    Default

    Are you talking about the blastic coils used to round up atuo wires? I think those wouldn't be a tight fit. However, I've always been an advocate for electric tape, its some of the best stuff on the planet. I have some in my case too :thumb: . FatGuy, you know if really stretch it as you wrap a wire, in shrinks to the form of the wire? It looks even better. Anyways, glad to see someone else is using it. : peace2: Mista K6
    Modified Dell 8200 Case:
    -400MHz FSB i850 Intel mobo
    -P4 Williamette Socket 478, 1.9GHz
    -768MB 16-bit PC800 RDRAM
    -MSI GF4 Ti4200 128MB @ 284/581
    -7200 RPM Maxtors: 60GB (2MB) on mobo and 160GB (8MB) on ATA/133 PCI Card
    -Creative Inspire T7700 7.1 Speaker System on an Audigy 2
    -Windows XP Home Edition SP2

    Rock on : peace2: , MiStA K6

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •