Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 42

Thread: Modding my case for better cooling.




  1. #11

    Default

    Well I already have an 80MM sunon at the top of my case. I can manage getting the wire through a hole but what about the passthrough molex connectors? That would have to be a really big hole. And as I look down at my computer as I type this I notice I can even slip it through if I wanted to. Unless I drilled a bit away from my fan? Like a piece of the plastic on the fans exterior casing?

  2. #12
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Read post above. ;)


  3. #13

    Default

    lol didn't see that.

    but wait how am I supposed to hide the fan?

  4. #14
    Join Date
    May 2002
    Posts
    2,489

    Default

    I have i have 4 80mm intake fans plus and empty drivebay with a drive bay fan and 3 exhaust fans one of those is a PCI slot fan...that setup works real well.
    - Damien

  5. #15

    Default

    I once bought a PCI slot fan cooler and was gonna use it. THe damn thing would fit in the slot unless I removed the PCI slot below the video card. I wanted it to remove some heat comming off the fan of my vdieo card. That would probably remove alot of heat from my PC.

  6. #16
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Inside the filter housing which sits on top of the case. ;)

    They're made in 3 pieces, top, bottom and the ring of perforated steel that keeps them apart. You will have to mod the bottom piece a little (cut out the carby fitting collar) so that the fan, filter housing and case meet properly but there's plenty of room for the fan to hide inside the housing.

    Here's a couple of examples <img src="http://www.hotrodchrome.com/aircleaners/1.jpg"> <img src="http://www.hotrodchrome.com/aircleaners/4.jpg"> :smokin:
    <center>:cheers:</center>

  7. #17

    Default

    ooooooooo lol now I get it. Make it look like a carby. lol. How many MHz can I get out of that? :D

  8. #18
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    I'm not really sure but I can't find the pic of one with the Air filter on top and dual exhaust pipes at the back, it looked very good though. :thumb:
    <center>:cheers:</center>

  9. #19

    Default

    Dual exaust pipes for the exaust fans? How about fart pipes to make my exaust sound like a honda?

  10. #20
    Join Date
    Feb 2002
    Posts
    777

    Default

    I once bought a PCI slot fan cooler and was gonna use it. THe damn thing would fit in the slot unless I removed the PCI slot below the video card. I wanted it to remove some heat comming off the fan of my vdieo card. That would probably remove alot of heat from my PC.
    hehehe, my video card runs hotter than my cpu, neither overclocked
    Athlon XP 1600+ @ 1662Mhz | Volcano 7+ HSF | Soltek SL-75DRV5 | 256MB Corsair XMS-3000 DDR RAM | 44x44x24 Yamaha CDR-W F1 | 16x Liteon DVD | 40Gig 7200rpm Seagate Barracuda | 20Gig 5400rpm Seagate | GeForce2 MX-400 | SB Live! | RTL8139A NIC | RTL8139B NIC | 12 Fans | 1 x ss Blue cc | 2 x Red Neons | 450W Codgen PSU | Logitech Z-340 2.1 Sub and sats | 17" Osborune Monitor | Win XP Pro | M$ explorer rat and keyboard | Everglide Attack Optical

Page 2 of 5 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •