Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: ModMyMods Sposored Build: Lake Effect




  1. #1
    Join Date
    Aug 2015
    Location
    Fairport, NY
    Posts
    3

    Default ModMyMods Sponsored Build: Lake Effect

    ModMyMods Sposored Build: Lake Effect-lakeeffect-jpg


    We at ModMyMods are happy to announce the start of our foremost custom PC build in collaboration with J&N Computer Services.
    With all of our collective PC Modding experience we are anxious to show our newest custom build. We will be using the Antec P380 PC chassis as a base for the build, upon which we will demonstrate a few of the different custom services and products that we offer. These services include powder-coating, hydro-dipping, full water cooling and more! Big thanks to several generous sponsors who have made this project possible, including Antec, EVGA, Gigabyte, Intel, Kingston, Mayhems, Darkside, Alphacool, MNPCtech and UPC!





    We will be documenting the entire build and mod process and will be posting updates to our build log as we go.
    Stay tuned for more updates and information as we progress through the build!
    Below you can find a list of components and parts that we will be using for this system!



    PC Parts Picker


    Project Lake Effect:

    Case: Antec P380
    CPU: Intel i7 5930k
    Motherboard: Gigabyte X99-SLI
    RAM: 16GB Kingston HyperX Savage DDR4 (HX424C12SBK4/16)
    GPU: EVGA GeFforce GTX 980 4GB SC (P4-2983-KR)04G-P4-2983-KR)
    SSD: TBD
    PSU: EVGA Supernova 1000P2
    Fans: Darkside Gentle Typhoon 1850RPM
    Radiators: Alphacool NexXxoS UT60 360mm Radiator, Alphacool NexXxoS ST30 360mm Radiator
    CPU Block: Aquacomput​er Cuplex ​Kryos XT f​or Sockets​ 1366/1156​/1155/1150​/775, G1/4
    GPU Block: Aquacomput​er Kryogra​phics for ​GTX 980 - ​Nickel
    Backplate: Custom Engraved Aquacomput​er Backpla​te for Kry​ographics ​GTX 980, A​ctive XCS
    Pump: Alphacool VPP655 Pump Motor
    Pump/Reservoir Combo: Barrow 150mm D5 Pump Reservoir Combo
    Coolant: Mayhems White Pastel Coolant
    Lighting: Darkside Dimmable LED Strips
    Tubing: Acrylic Hardline Tubing
    Fittings: Barrow Hardline Fittings
    Last edited by ModMyMods; 11-04-2016 at 11:52 AM.

  2. #2
    Join Date
    Aug 2015
    Location
    Fairport, NY
    Posts
    3

    Default Re: ModMyMods Sposored Build: Lake Effect

    Lake Effect Update Part 2: Antec P380 Overview with Radiator & Drain-Port Installation



    We've recently been working on Project Lake Effect and wanted to give you all an update to see what we've been up to.


    In the video below you will see Joe break down some of the features of the P380 and make some small modifications.










    With the successful installation of the two radiators, we can begin preparing the chassis for paint and hydro dipping!




    The Front Alphacool NexXxos ST30 360mm Radiator Installed





    Joe Installing a new hole for an integrated Drain-Port


















    Stay tuned for more build updates in the near future!
    Last edited by ModMyMods; 11-03-2016 at 09:54 PM.

  3. #3
    Join Date
    Aug 2015
    Location
    Fairport, NY
    Posts
    3

    Default Re: ModMyMods Sponsored Build: Lake Effect

    Update Time! Joe made a video and you should totally watch it.






    Watch as Joe shows off some cable management, points at things, drills some holes and installs the Barrow Tube Reservoir/Pump combo into the chassis! We're always happy to show off some of the mods we have in store for this build and we can't wait to get some of the more exciting mods underway!








    With our two radiators seated nicely into our case and linked, we sleeved and mounted our Gentle Typhoon 1800RPM fans.














    The lovely folks at Ultimate Personal Computers were nice enough to sleeve all of our internal power cables giving our project it's black and white theme that we love so much. We think they did a great job so be sure to check them out!



























    Today Joe installed a Barrow Pump/Reservoir Combo unit into the chassis. In the coming weeks we're going to be getting the case ready for hydro-dipping and powder-coating.


    By drilling just a few holes in the bottom of the Antec next to the PSU, we were able to mount our Barrow Reservoir in a prominent and easily accessible position that is out of the way of other major components!











    Stay tuned for more updates as Project Lake Effect progresses! Up next we're giving you a "How To" guide on graphic's card installation, plexi window installation and much more!
    Last edited by ModMyMods; 11-04-2016 at 12:08 PM.

  4. #4
    Join Date
    May 2017
    Location
    Armenia
    Posts
    3

    Default Re: ModMyMods Sposored Build: Lake Effect

    Wow,

    The post is awesome and the images are cool. I will defently follow your posts.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •