Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: rising cpu temps




  1. #1
    Join Date
    Jun 2003
    Posts
    24

    Default

    like i said, cpu temps have risen 2-3C for no explainable reason (not summer)...all settings the same as before. running 1.65V in BIOS...temps in bios steady at 51-52C but MBM jumps around...have done all the usual troubleshooting, nada....any ideas? ambient temp 75F (25-27C?)
    Barton 2500+ (218x11) - SLK800A w/Vantec Tornado - G-byte GA7N400L1 - 256x2 TwinMOS DDR400 - BBA R9600Pro - Antec 350W

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    When was the last time ya cleaned the dust out of it? :?:

  3. #3
    Join Date
    Jun 2003
    Posts
    24

    Default

    no dust....
    Barton 2500+ (218x11) - SLK800A w/Vantec Tornado - G-byte GA7N400L1 - 256x2 TwinMOS DDR400 - BBA R9600Pro - Antec 350W

  4. #4
    Join Date
    Feb 2003
    Posts
    97

    Default

    maybe your fan is breaking down

  5. #5
    Join Date
    Apr 2003
    Posts
    114

    Default

    How often is MBM taking readings? Default is every 10 seconds. This could show a jump of 2c between the time you start an app. and the next read.
    [size=1.5]AMD 2100+ | Epox 8RDA+
    2x256KHX3000 | AreoFlow TMD
    Antec SmartBlue 350watt | 2 TT80mm case fans | WD 120gig
    Maxtor 60gig | FIC 9800pro | Apex Thermally enhanced case [/size]

  6. #6
    Join Date
    Jun 2003
    Posts
    24

    Default

    sorry all...my cpu pads slipped and caused the hs not to have full contact with the core....anyway, i have an SK-7 now with a 10C drop from my original temps on the V9......make that 12C cause i just put the sf2 (at full tilt) on.....
    Barton 2500+ (218x11) - SLK800A w/Vantec Tornado - G-byte GA7N400L1 - 256x2 TwinMOS DDR400 - BBA R9600Pro - Antec 350W

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •