Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Arctic Freezer Pro 7 on EX38 DS4




  1. #1
    Join Date
    May 2008
    Posts
    21

    Default Arctic Freezer Pro 7 on EX38 DS4

    Got a EX38 DS4 with Arctic Freezer Pro 7, and when having it faced the way the manual tells me it pushes against the ram. I have thought about cutting off the little bit of plastic that is pushing on the ram, or having it face towards my vid card and have the heat being pushed out the back into the top and putting an exhaust fan up there.

  2. #2
    Join Date
    Sep 2008
    Posts
    80

    Default Re: Arctic Freezer Pro 7 on EX38 DS4

    I'd take a dremel tool to it... With the air exiting toward the rear of the case, if you notice that the bottom three fins are curved toward the MOBO, it gives a little extra cooling to the row of voltage regulators just to the fore end of the connector stack.

  3. #3
    Join Date
    Jan 2009
    Posts
    56

    Default Re: Arctic Freezer Pro 7 on EX38 DS4

    remember not to let mod shavings fall into your case ...no brainer but had to say it...
    Last edited by pchaplo; 01-22-2009 at 08:53 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •