Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: megahalems fan clips




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  2. #12
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: megahalems fan clips

    clips arrived

    will post pictures of system once running
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  4. #14
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: megahalems fan clips

    well.. not sure yet.. will find out when i get home tonight...
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  5. #15
    Join Date
    Dec 2008
    Location
    VA
    Posts
    32

    Default Re: megahalems fan clips

    any luck with those clips? i emailed prolimatech as well but they said the only new clips they have are for the armageddons. If you happen to have a pic it would be nice so i could show them what you got :)
    Intel i7 930 (21*160)
    Gigabyte ex58a-UD3R v1.0, Bios: F7m
    G.Skill F3-12800CL7T-6GBPI
    Antec CP-850
    Prolimatech Megahalem - Akasa Apache Black PWM
    EVGA GeForce 570 GTX

  6. #16
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: megahalems fan clips

    hmm strange, i mailed them and explained the problem and they responded with a very friendly email.

    New clip design on the left.

    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  7. #17
    Join Date
    Dec 2008
    Location
    VA
    Posts
    32

    Default Re: megahalems fan clips

    I think that's the one that came with my rev. b mega :( Still hits the ram. I debated sending the ram back, but it's just toooo nice (G.Skill PI 1.5v 1600) hahaha.

    My solution... I took some old Noctua fan clips and slapped it on, and to my surprise it works like a charm :) it holds the fan pretty tight in but since it clips to the inside, not the outside of the fan it works. Does your clip do the inside hole or outside?
    Intel i7 930 (21*160)
    Gigabyte ex58a-UD3R v1.0, Bios: F7m
    G.Skill F3-12800CL7T-6GBPI
    Antec CP-850
    Prolimatech Megahalem - Akasa Apache Black PWM
    EVGA GeForce 570 GTX

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: megahalems fan clips

    Put a zip tie through the fan holes from one fan on one side to the other fan on the other side, that should work easily and then no clips would be needed at all.

  9. #19
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: megahalems fan clips

    depends on the fan, but i was able to bend/slide mine upwards to fit the memory underneath, but my fans have a triangular cut-away around the hole so that work fine.... or as lsdmeasap said.. zip tie it :)
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •