Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: CoolerMaster

  1. #11


    Sandra reports my proc temp at 72 C :) (Albatron PX845PEV Pro) bios reports it at 34 C... Hardware probe (seated on the edge of the P4 processor under the heatsink (as close to the heat spreader I can get without comprimising the AS3)) and it reads 33 C. What board are you using? I think the problem lies in the winbond chipset itself to be completely honest... This phenomina is not related to just this albatron board (although, if you got a beta bios comming for the mobo i just posted above (and see sig heh) I'd like to get me hands on it).

    Anyway, the bios reports the temps from the winbond SuperIO controller, I believe through probing the internal CPU diode, but I suppose that's wishful thinking (only reason I come to this conclusion is because there's a 1 degree variance on my board)

    Just checked with the 2.8 (running a px845pe pro ii) and it's set up the same (probe wise) as this and it's reporting 36 C in the bios, but the probe reads 38 C

    Edit: Machines were shut down after being loaded (well the 2.8 is always loaded ([email protected])) and the 2.53 was running seti at the time of shutdown too, so upon entry into bios, temps maybe dropped about 1 or 2 degree's C (3 at the most).
    <font size=1>Pentium 4 2.53GHz @ 3.515GHz (FSB: 185; VCore: 1.725)</font>
    <font size=1><a href="">ThermalTake Volcano 7+</a></font>
    <font size=1><a href="">Albatron PX845PEV-800</a></font>
    <font size=1>512MB Samsung DDR333 @ DDR370</font>
    <font size=1><a href="">Radeon 9700 Pro 128MB</a></font>
    <font size=1><a href="">Adaptec 29160 Ultra160 SCSI Controller</a></font>
    <font size=1><a href=",1081,321,00.html">Seagate ST373405LW 73GB U160 SCSI</a></font>
    <font size=1>Enermax EG465P-VE 450watt PSU</font>
    <font size=1>CPU Temp (100%): 39 C; HDD Temp (100%): 31 C (100%); Chipset Temp (100%): 32 C</font>

  2. #12
    Join Date
    Feb 2003


    That's good to hear. I'm not as worried now. I just flashed the new BIOS they sent me. It adds another temp readout. It used to look like this...

    CPU temp


    CPU temp (inside)
    CPU temp (on PCB)

    I'm at 30*, 49*, 28* BTW

    That 49* shows up as 95* in MBM5 and Sandra, and was nowhere to be seen in the old BIOS. Everything seems to be running fine though, so I'm guessing everything is OK.

    One thing about the BIOS they sent though, my USB mouse doesn't work. I had to use the ps2 adapter.
    Albatron PX845PE Pro II
    2.53GHz P4 (so far)
    512mb PC2700 Kingston Value RAM
    Thermaltake Volcano 7+
    Enermax EG465P-VE power supply
    Some cheap ass case I found for $30
    Matrox Millenium G400 Max (:o)

  3. #13
    Join Date
    Nov 2002


    One thing to remember. When you boot your comp to Bios the comp doesn't have any software loaded yet. When windows boots the comp had programs running and thus the temps will be higher. but a temp that high makes me wonder about a lot of things...not sure what they are but a lot of things! My temp diffs between Bios and Op system are only a few degrees at the most

    Also with the BIOS update make sure that the new BIOS has USB support enabled. Sometimes that option will be turned off and you will need to enter BIOS and reenable it to get the USB ports to work.

  4. #14
    Join Date
    Nov 2002


    You have to be kidding me...what was that S#!T? Adverts on TT? Not on my watch. Way to go Admin...ban them *******s

  5. #15
    Join Date
    Nov 2001
    New England Highlands, Australia


    I fixed him. :devil:

  6. #16


    :devil: I was running at 54 with my coolermaster. :snip: Then i got a Volcano 6 (7500 rpms) and my processor runs at 36:afro: :flames: :devil win

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts