Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Official timings for these?




  1. #1
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Official timings for these?

    8GB G.Skill DDR3 PC3-12800 1600MHz RipjawsX Series for Intel Sandy Bridge Platform (8-8-8-24) Dual Channel Memory kit


    For 2133mhz..actually 2143 mhz at present running at 1.53v

    What are the official/semi official timings for these? with the following uefi options:

    Official timings for these?-130128215148-jpg
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  2. #2
    Join Date
    Sep 2011
    Location
    Taipei, Taiwan
    Posts
    106

    Default Re: Official timings for these?

    Hi Kick,

    For the official timing, please check out our 2133Mhz products: G.SKILL- World leading DDR3 computer memory and SSD manufacturer -Products

    But your timing is better then the official settings, you may try to lower the first one(tCL) to 9 by same voltage, if not work, slightly raising the DRAM voltage to 1.55v for another try.
    Hope you can get the great number and share with us!

    Thanks
    G.Skill Tech Support

  3. #3
    CDS Foley is offline Junior Member
    Join Date
    Jan 2013
    Location
    where the sun shines
    Posts
    29

    Default Re: Official timings for these?

    That looks dang good to me kick for 2133MHz try ^^^^ and see wot pops

  4. #4
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Official timings for these?

    Thx guys,
    I suppose I need to give a bit more information.

    At 100 base clock 2133mhz 9-11-10-(28-34) with the other timings on auto all post and boot at 1.62,1.635 and 1.65 v but not below that.
    Even 9-10-10 24 posts and boots at 1.65v but no amount of twiddling around with vtt ,or even lowering the base clock by 1 to 99 seems to get the sticks long term stable.
    At that point the benchable performance is already below 10-11-10-28 at 100.5 bclk.Even at 100 baseclock on either 9 or 10 is around .5gb/s like 27.6 vs 28.2.
    Latency there isnt much in it either.
    Im not complaining..:) ,it clocks as well as Id hoped, but Im not going to leave it at 1.65v 24/7 cos its not stable at least on my settings with 9 cas.

    10-11-10-28 at 1.53v(it seems ok at 1.5v also) at 2143 or 100.5 baseclock with 4.82 cpu is long term stable at least in my testing/usual applications and games.
    Ive tightened up some of the secondary timings with suggestions from site members but this memory like my gskill 1333mhz 9-9-9-24 has been tested onthe ext6 p67.whether by Asrock or Gskill im not sure.

    Either way Gskill must have done some testing on the sticks ,I was wondering what the best /usual secondary timings on those are for running at 2133mhz are or perhaps the usual secondary settings for gskill 2x4GB DDR3 sticks sold as 2133 17000 10-11-10-28 memory..there seem to be quite a few of them?

    Of course if "Jim"or anyone in the Gskill testing/binning lab discovered that some samples of my sticks will run at 9-9-9-24 at 2133,and they just need to be undervolted to 1.45v or something equally unlikely!, feel free to let me know.


    Official timings for these?-somespeed-jpg
    Last edited by kick; 01-30-2013 at 02:30 AM.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •