Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 123 of 185 FirstFirst ... 2373113121122123124125133173 ... LastLast
Results 1,221 to 1,230 of 1847

Thread: Welcome to GIGABYTE Technical Support!




  1. #1221
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Ahh, well nice to see you sorted it all out!

    Not always, sometimes at higher speeds the memory will use slower timings, so that would be why you may see the difference. It may be faster at slower speeds with tighter timings, benchmark with a few programs and see which way is better.

    Use real benchmarks though, not the windows index :)

  2. #1222
    Join Date
    Feb 2011
    Location
    Malaysia, Kuala Lumpur
    Posts
    3

    Default Re: Welcome to GIGABYTE Technical Support!

    Thanks alot
    The timing I followed recommend by Corsair 5-5-5-15-2T at 2.2 volt

  3. #1223
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Ya, that sounds about right for 1066Mhz, at 800Mhz you can use 444-12, so that may be why it's faster.

    Compare with MaxMemm, RightMark, or Everest and see
    http://forums.tweaktown.com/gigabyte...ity-tools.html

  4. #1224
    Join Date
    Mar 2009
    Location
    www
    Posts
    6

    Default Re: Welcome to GIGABYTE Technical Support!

    hi just purchased a P67A UD4 and 2600k and was wondering if the 1.4 vcore max that ppl say is best to stick to when OC is ok for a 24/7 Rig

    i had mine at 1.385 to get 5.0GHz HT on load temps where 70-80 ish prime95 67c gaming

    now im on 1.360 at 5.0GHz with HT off temps are 64c in prime and 54 when gaming

    i like lower vcore = less temp
    Gigabyte P67A UD4 @ 5.0GHz (1.360 vcore HT Off)
    Corsair Vengeance Ram Size 8GB Kit (2 x 4GB) @1600Mhz 8-8-8-24 1.646qpi
    EK SupremeHF Waterblock
    2x60Gig Vertex 2 SSD Raid 0
    1TB Samsung
    2TB Western Digital
    Sapphire 5970 2gb Accelero XTREME 5970
    Xifi Titanium Fatality Pro
    ZBoard Keyboard
    G500 Mouse
    Crosair 850 PSU
    HAF X
    Idle Temp 37c
    Prime95 Temp 64
    Bad Company 2 Temps 54

  5. #1225
    Join Date
    Jan 2009
    Posts
    4

    Default Re: Welcome to GIGABYTE Technical Support!

    Hello gigabyte

    I am using a EP45-UD3R with a F5 Bios
    It seems to me that we could chose a PWM profile ( like silent, optimal, performance) for the CPU fan but I am unable, after a carefull review, to find the place where we could define this parameter.
    It could be that I am confusing with another board.
    Could you help please?
    Last edited by Lecopi; 02-22-2011 at 05:10 PM. Reason: mistake correction

  6. #1226
    NoJuan999 is offline Member
    Join Date
    Feb 2011
    Location
    Ireland
    Posts
    214

    Default Re: Welcome to GIGABYTE Technical Support!

    Can someone Please tell me what changes were made in the F15A Beta BIOS for the GA-P55A-UD4P ?
    What is different than the F14 BIOS ?

  7. #1227
    Join Date
    Feb 2011
    Location
    Bucharest
    Posts
    1

    Default Re: Welcome to GIGABYTE Technical Support!

    Hey, weird things happen with my ep35-ds3r, rev 2.1, F4 bios mobo. Currently i have an e4300 @1.8 Ghz in it and i though i should up it a bit(like to 2.2 or smth like that). I didn't want to mess with other stuff(or better said i didn't want to get reacquainted with OC-ing), so i let it all on auto. No matter how small the change(multiplier or Fsb)...after reboot the PcHealth(and in cpu-z too) section shows 1.57v in the processor, and i'm sure that's way off the chart for how much it should be at that speed. I also tried this with an e450 m0...same issue. Any ideas?....

  8. #1228
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Welcome to GIGABYTE Technical Support!

    @numaru7

    please create a new thread, fill your signature with system hardware specs, memory part number/model etc, and fill the template from this post with your attempted OC settings.
    Maybe we'll be able to advise.

  9. #1229
    Join Date
    Mar 2011
    Location
    Gloucester
    Posts
    5

    Default Re: Welcome to GIGABYTE Technical Support!

    I hope this is the right place to post! First post :-)

    My partner recently had a rig built for me to cheer me up after some personal problems. Details are in my sig. Total surprise for me so very nice gift. My reason for posting is GPUZ and the NVidia Control Panel detailed info show my GTX570 as being PCI Express x8 Gen 2. Now The card is in the top slot, PCI Express 16 labelled clearly. There is nothing occupying the other PCI Express slots. Most bios options are all at stock. She got me the 2600 not the 2600k so no over-clocking done on the board for CPU. Am I missing something or is that the way it is supposed to be? Things run very nicely but a friend pointed it out to me yesterday when he came to inspect my new toy.

    Thanks in advance

    Chris
    GA-P67A-UD5 Rev. 1.0 F6
    Intel Core i7-2600 3.40GHz (Sandybridge) all at stock
    Prolimatech Megahalems Rev B CPU Cooler
    Corsair Vengeance 8GB (2x4GB) DDR3 PC3-12800C8 1600MHz Dual Channel Kit
    POV GTX570 TGT Beast at stock
    Coolermaster 850W PSU
    Corsair Obsidian 800D Full Tower Case
    Benq XL2410T 24" TRUE 120Hz Monitor

  10. #1230
    Join Date
    Feb 2010
    Location
    Denver,CO
    Posts
    27

    Default Re: Welcome to GIGABYTE Technical Support!

    Just picked up the G1 Assassin, just wondering if someone could give me some information on the e2100. I have never used one and unsure of how to set up. I run the band width test and it fail every time. any help would be nice.

Thread Information

Users Browsing this Thread

There are currently 35 users browsing this thread. (0 members and 35 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •