Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 181 of 185 FirstFirst ... 81131171179180181182183 ... LastLast
Results 1,801 to 1,810 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #1801
    sfuma is offline Junior Member
    Join Date
    May 2016
    Location
    Россия
    Posts
    8

    Default Re: Welcome to GIGABYTE Technical Support!

    [QUOTE = boe323; 504981] у вас есть переключатель BIOS? если вам не нужно, чтобы заставить резервную копию флэш основной. Кроме того ... thjey должен поддерживать центральный процессор, если более ранняя версия BIOS уже поддержали его. [/ QUOTE]

    translation of quoted text:
    do you have a BIOS switch? if you do not need to make a backup of the main flash. Also ... they must support the CPU when an earlier BIOS version already supported it.
    I have no BIOS switch. BIOS-F6, F7 update two chips. BIOS-F6, F7 prohibits updating to earlier version BIOS.
    Last edited by profJim; 06-01-2016 at 04:10 PM. Reason: added translation to English

  2. #1802
    boe323 is offline Member
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    476

    Default Re: Welcome to GIGABYTE Technical Support!

    I have no idea why your seeing Russian and have to translate? looks like the only way round this is to rma/service the board theres a small fee if its run out of warranty. That's if is cpu support that's causing the issue. Unless anyone else can think/provide an answer?
    A WHOLE LOT OF NOTHING WORKS PROPERLY

  3. #1803
    boe323 is offline Member
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    476

    Default Re: Welcome to GIGABYTE Technical Support!

    Dude ..I just realized your on about windows and not the bios. Theres nothing to worry about lol, its could be a bad driver so just go through them and update or roll back to generic drivers.
    Last edited by boe323; 06-03-2016 at 01:21 AM.
    A WHOLE LOT OF NOTHING WORKS PROPERLY

  4. #1804
    sfuma is offline Junior Member
    Join Date
    May 2016
    Location
    Россия
    Posts
    8

    Default Re: Welcome to GIGABYTE Technical Support!

    Intel 535 SSD long boot time Windows 10 (black screen with cursor). MY VIDEO:

    Howdy Everyone. Just picked up the Intel® Solid State Drive 535 Series 2.5” 120 Gb. Installed it on my GIGABYTE GA-H97-D3H board and installed Windows 10 X64 without a problem. However, I am seeing a boot performance issue. This drive is taking about 19 seconds to boot, approximately 7 seconds longer than my Plextor M5S PX-128M5S.
    GIGABYTE - Is this going to be fixed in a future bios release? My bios: F7

    My correspondence with technical support INTEL
    Last edited by sfuma; 06-21-2016 at 01:13 PM.

  5. #1805
    Join Date
    Jun 2016
    Location
    Canada
    Posts
    4

    Default Re: Welcome to GIGABYTE Technical Support!

    Janus,

    I am considering building a new workstation around the GA-X170-EXTREME ECC. I read Steven's article GIGABYTE X170-Extreme ECC (Intel C236) Motherboard Review and noticed he had used a Boot Drive: Samsung 850 Pro 512GB as well as a M.2 Drive: Kingston HyperX Predator 240GB PCIe x4. I was wondering if the X170 can boot via the M.2 interface? I read through the manual and all I could find was UEFI boot devices. I wasn't planning on a separate SSD for booting. But I was planning to fill both M.2 slots for RAID!

    Dave

  6. #1806
    SchenckelBros is offline Junior Member
    Join Date
    Jul 2016
    Location
    Brazil
    Posts
    1

    Default GIGABYTE Motherboard FAN pinout

    Hi guys.

    My girfriend have a GB Motherboard (GA-970-Gaming) and i see little bit difference between ASUS 970 PRO GAMING in PIN configuration. Recently when had i plugged fan a little smoke from conector. After this she go to user manual read about this and share with me.

    You can see side by side (http://prntscr.com/br5q0p)
    Why CPU FAN and SYS FAN is pinout different in GIGABYTE board and ASUS no?

    Sorry for my bad english.

    I am very grateful if someone can help me.

    Thanks,
    Jacson

  7. #1807
    sfuma is offline Junior Member
    Join Date
    May 2016
    Location
    Россия
    Posts
    8

    Default Re: Welcome to GIGABYTE Technical Support!

    GIGABYTE. Why you abandoned updated BIOS for the chipset Z97, H97? You bad company. MSI overtakes you on Upgrading firmware. Your motherboard I no longer buy. You do not love their fans!
    Last edited by sfuma; 08-31-2016 at 02:04 AM.

  8. #1808
    Join Date
    Oct 2016
    Location
    usa
    Posts
    2

    Default Re: mad at windows need a file

    just recentl windows crashed my pc with an update. I went with a clean install with a usb file from microsoft. The file stopes in the middle of install and wants a media driver. After much biccering with them they agreed ithere file was missing from the dnload. And basicly told me to just go to Gigabyte or amd and figure it out myself. where can i get a driver for my GA78LMT-USB# motherbord?

  9. #1809
    stasio's Avatar
    stasio is online now GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Welcome to GIGABYTE Technical Support!

    ^
    very easy to search with google "GA78LMT-USB#".
    You must be sure about revision of your board...
    Example....GA78LMT-USB3....

    GIGABYTE - Motherboard - Socket AM3+ - GA-78LMT-USB3 (rev. 4.1)

    Btw,
    you should have GB original CD with drivers in the box.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  10. #1810
    Join Date
    Nov 2016
    Location
    USA
    Posts
    3

    Default Re: Welcome to GIGABYTE Technical Support!

    I have Gigabyte Z87X-UD7 TH that I wanted to upgrade F5a/F4 bios, but I just found out it currently has F1g bios of Gigabyte Z97X Gaming G1. I couldn't use Qflash/EFIflash/@bios lateste version to upgrade to right bios because current bios is 8Mb and other bios versions are 16Mb size. I also used Afudos Aptio force flash but it always showed either bios is write-protected or error 46: Problem getting flash information. What should I do to upgrade to right bios?

Thread Information

Users Browsing this Thread

There are currently 39 users browsing this thread. (0 members and 39 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •