Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 23 of 185 FirstFirst ... 1321222324253373123 ... LastLast
Results 221 to 230 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #221
    Join Date
    Feb 2009
    Posts
    1

    Default Welcome to GIGABYTE Technical Support!

    Hi
    I bought a GA-EP45T-UD3R motherboard and added in Corsair DDR3 2GB (2 x 1024MB) 1333MHz 2 x 240pin DIMMs - TWIN3X2048-1333C9. I decided to buy another set of the above memory which would take me to 4GB, when i add in the 2 extra modules my system stars beeping continiously and cannot get to the Post Screen.

    I tested the memory modules and seem to work fine in slots 1 & 2, but soon as you add extra memory to slots 3 & 4 starts beeping.

  2. #222
    Join Date
    Feb 2009
    Posts
    10

    Default Re: Welcome to GIGABYTE Technical Support!

    Ok I am not sure if it applies to your memory but I read that for DDR2 1066 on a GA-EP45-UD3R if you populate the other 2 slots it will only run at 800. you have to slow it down. This was from gigabyte support.

  3. #223
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Welcome to GIGABYTE Technical Support!

    hy_tek,
    this is GA-EP45T-UD3R,which is DDR3

    vin007,
    I sugest you to open new thread.You will need to provide more information like CPU,
    memory voltage,did you overclock,etc.
    Btw,
    you should run first pair in slots 1 & 3(or 2 & 4),to be in dual mode.
    Also you will need to increase MCH Core and make adjustment for 4x1 GB.
    Read same threads already posted here for your board.Be sure that you are stable with 2X1 GB memory.
    Last edited by stasio; 02-25-2009 at 08:53 AM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  4. #224
    Join Date
    Feb 2009
    Location
    Sweden, Skåne
    Posts
    19

    Default Re: Welcome to GIGABYTE Technical Support!

    Hi! I've think I have a problem with my motherboard and my memories.
    Sometimes my computer just freezes randomly and I have to restart it manually.
    What's the problem? If someone know this problem please let me know how to work it out thanks!


    CPU : Intel E8400 dual core 3.0
    memory : Corsair 2x2gb DDR3 1600 mhz CL9
    hdd: seagate baracuda 500 gb sata 2
    motherboard : Gigabyte EP45C DS3R
    gfx : GeForce XFX 9800 GTX+ 775mhz
    --------------------------------------------
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:auto
    CPU Clock Ratio ..........................:9x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:3.0 Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:Set to 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<<
    PCI Express Clock Drive.................: <<<
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: X
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:auto
    Memory Frequency (Mhz) ..............:1066
    DRAM Timing Selectable ................: [AUTO]

    Standard Timing Control
    CAS Latency Time........................9
    tRCD .........................................9
    tRP'...........................................9
    tRAS..........................................24

    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< .61% Of Vtt (Termination above)
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 1.8V
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: 0.750 - auto
    Channel B Reference 0.900V............: 0.750 - auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    I havn't changed so much. So almost everything would be "standard"
    Last edited by fidde91; 02-25-2009 at 09:19 PM.

  5. #225
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    fidde91, please make a new thread with this info, and please do post ALL your settings you have set and We can help. If you are using Auto put Auto, I just say that because you left many things blank or as they were in the template without putting in what you are using

  6. #226
    Join Date
    Feb 2009
    Location
    Sweden, Skåne
    Posts
    19

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by Lsdmeasap View Post
    fidde91, please make a new thread with this info, and please do post ALL your settings you have set and We can help. If you are using Auto put Auto, I just say that because you left many things blank or as they were in the template without putting in what you are using

    Okey, Check after in in Gigabyte forum in a few minutes:D

    http://forums.tweaktown.com/f69/ga-e...600-mhz-30597/ There's my thread that I started yesterday
    Last edited by fidde91; 02-25-2009 at 11:25 PM.

  7. #227
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    K, I have replied. Sorry I am still a bit behind from my absence from the forums

  8. #228
    Join Date
    Feb 2009
    Posts
    13

    Default Re: Welcome to GIGABYTE Technical Support!

    Pls, could you help me? -> http://forums.tweaktown.com/f69/mons...extreme-30649/

    I tried everything but nothing. It seems there is some "block" that makes the vcore drop under load.

    thanks

  9. #229
    Join Date
    Feb 2009
    Posts
    26

    Default Re: Welcome to GIGABYTE Technical Support!

    I recently just purchased a GA-MA790XT-UD4P motherboard and everything is working fine. However i wanted to know what the limitation were for the FSB on the motherboard.

    I understand you don't support overclocking but this is just a question of whether your board has been tested to handle fsb speeds above 275mhz?

    In my experience i can safely hit a cpu speed of 3.5ghz at 270fsb but i cannot hit a speed of 2.9ghz when running at FSB 290. the board fails to post.

    I also have instances where changing a single setting in the bios is causing the system to not post even when its a trivial one like lower the speed of your memory. (if it can run at a higher speed why not a lower speed?)

    Do you have a new bios in the works for this motherboard? Is there a beta bios available to download for testing?

    So far i am disapointed in the stability of changing settings in the bios. more often than not it will fail to post on small changes.

  10. #230
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Sorry I cannot offer much advice about your FSB as I do not know about AMD based Boards

    As for changing your BIOS settings causing failure, are you leaving things in auto? If so that may be why

    As for a beta, I cannot find you one other then the posted F2. You may email Janus and see if he has any beta's for you. His email is in post #3 of this same thread

Thread Information

Users Browsing this Thread

There are currently 37 users browsing this thread. (0 members and 37 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •