Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 26 of 185 FirstFirst ... 1624252627283676126 ... LastLast
Results 251 to 260 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #251
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Anytime man!

    @ Bigjoeroy

    Did you get any further clearing the CMOS using my method?

  2. #252
    Join Date
    Mar 2009
    Posts
    3

    Default Re: Welcome to GIGABYTE Technical Support!

    No luck with clearning the CMOS. I have ordered another board and processor which should arrive today. I'll post which one I find to be the problem.

    thanks

  3. #253
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Ahh, ok well let us know what you find out! Hope all is well with the new hardware

  4. #254
    Join Date
    Mar 2009
    Posts
    40

    Default Re: Welcome to GIGABYTE Technical Support!

    Please help me with a problem I have (maybe) with my board. I wasn't able to resolve it so far.
    My board is MA78G-DS3H rev1.0, I assembled my system last August.
    Trying to make sure everything is fine with the new build I was following the temp with both BIOS and Everest Ultimate. The numbers seem to match with the difference that what BIOS calls system temp Everest calls motherboard temp and Everest is giving temps of both cores of my Athlon 4850e.
    The CPU temp was always around 34C and system temp max 41-42C. Everything looked fine for months so I stopped starting Everest to check from time to time. Few weeks ago I started the program and was shocked to see reported temp of 77C for motherboard temp. Rebooted to check the BIOS reading, the same 77C for system temp.
    The PC is exactly the same, sitting on the same spot. I even don't open the case that often.
    Do I have a faulty sensor? Lot of people seem to be complaining about this.
    Best to my knowledge, this second sensor is close to the NB chip, underneath the NB heatsink. I opened my case when the PC was already running for hours and touched the NB HS. Slightly warmer than my finger. I am no temp sensor myself but it looks to me more like the 41-42C I has reported earlier than 77C. I would not be able to hold 77C more than few seconds while I can hold my NB HS 8-10 second without any discomfort, even longer.
    So the first main question to locate the problem I guess is:
    Is that sensor really underneath the NB HS? Is this 77C reading real or fake?
    Also, could the HS just somehow lose connection with the chip making the chip much hotter than the HS? The PC is exactly on the same spot, not moved or banged around. What would disconnect the HS?
    Just to make further test, I used two screws and attached a 40mm fan on top of the NB HS, blowing downwards towards the HS. The temp didn't even move, 77C. No way that is correct. When I touch the HS with the fan on, it's cold. I wouldn't give it more than 15-20C.
    What do you think? And depending what you think I will have more question, don't worry. :)
    I am really desperate, I even don't know if I have a problem. I read somewhere that someone with GB board had that reading showing up to 127C and not below 89C at any time and he just disregarded it as faulty sensor. Is it safe if I do the same? But mine was showing 41-42C for months and then a sudden jump to 77C, a whole 35C difference.
    Thanks in advance. Cheers.
    PS. Could the NB HS get slightly detached from the chip which would make the chip hotter (maybe the 77C is correct after all) but the HS only warm to touch because there is no heat conducted properly. Should I try replacing the manufacturer HS? It all depends whether the 77C reading is correct or not. I would disconnect and take out the board, replace the HS just to find out that the sensor still says 77C. The case has not been moved or bumped around so I have no reason to think the HS is detached but who knows...

  5. #255
    Join Date
    Jan 2009
    Posts
    5

    Default Re: Welcome to GIGABYTE Technical Support!

    Hy All!

    My Friend's P35C-DS3R (rev 2.1) not supported the Pentium Dual Core E5400 processor.
    New bios update? Or the mobo is unsupported platform?

    Thx!

  6. #256
    Join Date
    Mar 2009
    Location
    Xiamen China
    Posts
    2

    Default PSU Voltages not being read

    Everest, SpeedFan or EasyTune6 do not display the 12V. Please advise on any reason or fix for this. Bios F4 and OC is Stable.

    Thanks



    Last edited by paulxmn; 03-16-2009 at 10:01 AM.

  7. #257
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by paulxmn View Post
    Everest, SpeedFan or EasyTune6 do not display the 12V. Please advise on any reason or fix for this. Bios F4 and OC is Stable.

    Thanks
    GA-EP45-Extreme sensor didn't measure 12V rail.
    This is in BIOS==> PC Health Status

    PC Health Status
    Last edited by stasio; 03-16-2009 at 11:35 AM.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  8. #258
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by szacsee View Post
    Hy All!

    My Friend's P35C-DS3R (rev 2.1) not supported the Pentium Dual Core E5400 processor.
    New bios update? Or the mobo is unsupported platform?

    Thx!
    BIOS F12e support Pentium Dual-Core E5300(not sure about E5400,but should be same)
    Source
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  9. #259
    Join Date
    Mar 2009
    Location
    Xiamen China
    Posts
    2

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by stasio View Post
    GA-EP45-Extreme sensor didn't measure 12V rail.
    This is in BIOS==> PC Health Status

    PC Health Status
    I fail to see how this applies to my question. Also the content assumes that I have no prior experience in using Gigabyte products or how to navigate inside the Bios settings. While you are busy being a "post hound" over at i4memory perhaps you should take the time to read my threads in the Gigabyte motherboard section.

    Moderator you can remove my posts from the forum.
    Gigabyte EP45T-Extreme Ver.1.00 Bios F3
    Windows XP3 Intel Core 2 E8500@4000Mhz (445x9)24/7
    Enzotech Sapphire CPU Block /Black Ice 120mm/Swiftech MCP355
    2GB Crucial DDR3 1600/2000 8.8.8.24/Antec Spot Fan
    HIS 4870Crossfire /Seagate 320GB SATA 2
    TT ToughPower 850W Silverstone TJ09
    General Use: Gigabyte X38-DQ6 Bios F7/F8
    Intel Core 2 E8400 475x8.5
    24/7 Zalman 9700LED
    4GB OCZ Reaper HPC PC8500 570Mhz 5.5.5.15 Antec Spot Fan
    Gainward 9800GTX 770/1100 SG 320GB SATA 2
    Zalman 600W Antec 900
    Logitech G15/MX5

  10. #260
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: Welcome to GIGABYTE Technical Support!

    kantona,
    try to read your Athlon 4850e with:
    Core Temp 0.99.5 build 20 (32-bit),because they found some bugs for your processor.Good luck.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

Thread Information

Users Browsing this Thread

There are currently 27 users browsing this thread. (0 members and 27 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •