Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 43 of 185 FirstFirst ... 3341424344455393143 ... LastLast
Results 421 to 430 of 1847

Thread: Welcome to GIGABYTE Technical Support!




  1. #421
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Mobo voltage settings for PC8500 Corsair memory

    "alright!" Great to here that. I use the bios for all changes if it's in there. The bios is the most reliable way to get your system where it should be. It is also good way to tweak the timings on your memory, and raise the clock ratio, and frequencies, for a stable overclock. I like the advanced feature when you first enter bios If you do not find the settings you want in the Main Menu or a submenu, press Ctrl+F1 at the same time to access more advanced options. Then go to Intellegent tweaker you will then see dram timmings selectable. You can change it from auto to manual and adjust the timings to speed up the memory. Lower is faster. You should find out what Corsair recomends your specific memory timings to be set to and make the neccessary changes to get that memory up to speed. The auto values in your bios are the jedec values for fail safe. You should adjust them up a little. Download cpuz or cpuid and check the memory tabs It's also a good utility for seeing your cpu vcore and frequencies
    Last edited by artdrivers; 06-23-2009 at 03:59 AM. Reason: mispelled intell
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  2. #422
    Join Date
    Sep 2002
    Posts
    40

    Default Re: Welcome to GIGABYTE Technical Support!

    I have a Gigabyte GA-EP45T-UD3P motherboard that I have been using for about 6 months. The USB ports on the back panel have stopped working. They show up in device manager as working. How can I get these to work again. I reinstalled all drivers.

    Ron

  3. #423
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    Hello Ron Marsico

    I dont know, have you tried removing the board from the case. To be sure you have no shorts from the backing plate ect...?
    Your best option is to buy external usb ports or the ones you hook up to a pci access panel.
    Last edited by artdrivers; 06-18-2009 at 06:56 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  4. #424
    Join Date
    May 2008
    Location
    Athens, Greece
    Posts
    41

    Default Re: Welcome to GIGABYTE Technical Support!

    Hello,

    I was checking some Bios Setup differences that my board has,compared to newer ones...

    I own GA-MA790X-DS4 and noticed that compared to GA-MA790X-UD4(P) and other AM2+/AM3 boards there are some BIOS options that i don't have :

    CPU-NB VID Voltage, HTT Voltage, HTR Voltage and so on...

    I don't know which ones are vital for getting a stable overclock on a Phenom II 940BE, but these are missing and instead i have the following option :

    Memory Controller Voltage

    with only options of undervolting from the normal value : -0.0125,....-0.05....

    My first question is what this option does...

    My second question is whether the other ones missing from my board's BIOS are chipset dependable or are just left out by BIOS programmers and if in the future they can be added...

    If i need to make this question in a new thread please inform me.

    Thank you

  5. #425
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    Did you update to the F3 bios? If not go to------> scroll down
    GIGABYTE - Support&Download - Motherboard - BIOS - GA-MA790X-UD4 (rev. 1.0)

    Page 39 of your manual
    http://china.giga-byte.com/FileList/...790x-ud4-e.pdf
    (Note 1) This item appears only if you install a CPU that supports this feature.
    (Note 2) This item appears only if you install a memory module that supports this feature.

    If you do not find the settings you want in the Main Menu or a submenu, press Ctrl+F1
    to access more advanced options. Do this while on the first screen in bios or cmos setup main page.
    System voltage control must be on manual not auto. Your other options may need to have auto disabled as well.
    Last edited by artdrivers; 06-19-2009 at 02:07 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  6. #426
    Join Date
    May 2008
    Location
    Athens, Greece
    Posts
    41

    Default Re: Welcome to GIGABYTE Technical Support!

    I own the DS4, not the UD4. I have bios version F6...F7 version updates only AGESA version for X3 Phenom support.

    Ctrl + F1 does not reveal any other voltage options. The only options i have are :

    Cpu, Memory Controller (only minus) , DDR2, NB, SB Voltage (see pics)








    ---->
    What exactly is meant by "Memory Controller Voltage" ? I guess it means the IMC, but the minus values are with reference to DDR2 Voltage or CPU Voltage ?
    Last edited by felix_w; 06-19-2009 at 05:09 PM.

  7. #427
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    I am Sorry Please forgive me for my confusion. UPDATE---->
    http://china.giga-byte.com/FileList/...790x-ds4_e.pdf
    I don't know!
    Could this be to change the memory voltage increments? When you set it to manual and select one does it change the DDR2 voltage control increments?
    Last edited by artdrivers; 06-19-2009 at 10:57 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  8. #428
    Join Date
    Jun 2009
    Location
    North Dakota
    Posts
    2

    Default Re: Welcome to GIGABYTE Technical Support!

    Ty Janus

    with my system I spend a lot of hours in game servers for my work, I've noticed that after a couple hours that I'm getting black blotches all over the screen that flash..

    this has happened with many different drivers from the 182 to the newest out.

    System Specs..

    Abit IP35 Pro
    Intel Q6600
    6g OCZ pc 1066
    GIGABYTE GV-NX88S512H-B
    PC&P 750w PSU
    XFI Fatality Pro

    any ideas on what would cause this?

    I really need this card to work for what I do..

    thank you very much..
    PBBans / Punkbuster Support

  9. #429
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    Hey IndianScout, I would contact them, I believe it's the Graphics card. ----->
    GIGABYTE - Support&Download - Technical Service Zone
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  10. #430

    Default Gigabyte GA-EP45-UD3R, Windows XP and AHCI

    I am about to change my motherboard to a Gigabyte GA-EP45-UD3R and reinstall the OS (Windows XP SP2) on to a SATA drive.

    I wish to install 4 x SATA 2 drives, 2 x hot-swappable eSATA and 1 x IDE DVD writer.

    Note: At some stage in the future I may wish to change the DVD-writer to SATA and I may wish to add another HDD and reconfigure the data HDDs as RAID.

    The Gigabyte GA-EP45-UD3R has six yellow connectors [SATA2_0....SATA2_5], two purple GSATA connectors [GSATA2_0, GSATA2_1] and a green IDE connector.

    I was going to mechanically connect my SATA drives as follows:
    SATA2_0.......XP Boot drive
    SATA2_1.......Data drive 1
    SATA2_2.......Data drive 2
    SATA2_3.......Data drive 3
    SATA2_4.......Leave vacant for future RAID HDD
    SATA2_5.......Leave vacant for future DVD writer
    GSATA2_0......eSATA connection
    GSATA2_1......eSATA connection
    IDE...........DVD writer

    Is the above physical arrangment OK?

    How do I set up the SATA ports in the BIOS for correct operation and best performance?

    My choice of drivers seems to be
    (a) Intel ICH9RICH10R Pre-install Driver (F6 during XP setup)
    (b) Intel ICH9RICH10R SATA RAID Driver
    (c) Motherboard SATA GB SATA2RAID

    Do I install all three? They are all highlighted for XP at the Gigabyte website.

Thread Information

Users Browsing this Thread

There are currently 34 users browsing this thread. (0 members and 34 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •