Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 82 of 185 FirstFirst ... 3272808182838492132182 ... LastLast
Results 811 to 820 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #811
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Are you loading the Pre-OS install drivers with windows as it installs?

  2. #812
    Join Date
    Apr 2010
    Location
    UK
    Posts
    3

    Default Re: Welcome to GIGABYTE Technical Support!

    nice technical support

  3. #813
    Join Date
    Apr 2010
    Location
    CANADA
    Posts
    2

    Default Re: Welcome to GIGABYTE Technical Support!

    Thank for the quick reply,

    I've load the mv91xx.sys (Marvell magni Windows Driver, Ver 1.0.0.1027) 64 Bit.

    4/20/2010 6:32 PM 284 KB

    I have to load the jraid.sys too??

  4. #814
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    To Kuff:
    I can't Boot a Win7 x64 from a IDE RAID
    I've try to do a AHCI RAID instead of a IDE RAID, same thing.
    ??? If you want to run your sata controllers in RAID they must be set to RAID in Bios
    I don't quite understand what you are trying to do. If your hard drives are hooked to the GSATA and you want RAID-0 you will need to pre-set the GSATA controller to RAID in Bios. If they are hooked to the SATA controller the same you will need to preset the SATA controllers in bios to RAID.
    Here is a pdf of your motherboard manual. It does explain how to setup and install Windows as a RAID-0. http://download.gigabyte.ru/manual/m...a-ud4(p)_e.pdf
    If you need more help. You may explain which SATA controller you got your harddrives hooked to Example (GSATA) or intel (SATA)
    Then copy this template and go into bios and fill out the template as to how your BIOS Integrated Peripherals are set up. Then come back here and post the template with your settings so we can see them and someone can further assist you. Lets not use failsafe, and any time you Load Optimized Defaults the bios will set it back to a standard IDE setting. This will cause the OS in RAID to not be functional until you set the SATA function back to RAID.

    Code:
    Integrated Peripherals
    eXtreme Hard Drive (XHD) [Disabled]
    PCH SATA Control Mode [IDE]
    SATA Port0-3 Native Mode [Enabled]
    USB Controllers [Enabled]
    USB Legacy Function [Enabled]
    USB Storage Function [Enabled]
    Turbo SATA3/USB 3.0 [Disabled]
    Azalia Codec [Auto]
    Onboard H/W 1394 [Enabled]
    Onboard H/W LAN1 [Enabled]
    Onboard H/W LAN2 j [Enabled]
    Green LAN [Disabled]
    } SMART LAN1 [Press Enter]
    } SMART LAN2 j [Press Enter] Onboard LAN1 Boot ROM [Disabled]
    Onboard LAN2 Boot ROM j [Disabled]
    Onboard IDE Controller [Enabled]
    eSATA Controller [Enabled]
    eSATA Ctrl Mode [IDE]
    GSATA Controller [Enabled] GSATA Ctrl Mode [IDE]
    GSATA RAID Configuration [Press Enter]
    Onboard Serial Port 1 [3F8/IRQ4]
    Onboard Parallel Port [378/IRQ7]
    Parallel Port Mode [SPP]
    Last edited by artdrivers; 04-25-2010 at 12:16 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #815
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by Kuff View Post
    Thank for the quick reply,

    I've load the mv91xx.sys (Marvell magni Windows Driver, Ver 1.0.0.1027) 64 Bit.

    4/20/2010 6:32 PM 284 KB

    I have to load the jraid.sys too??

    First off, be sure you are now starting from Optimized Defaults before you go further.


    Set GSATA to AHCI and then enter the next RAID controller screen and build your array.

    You must be loading this RAID Pre-OS install driver while win 7 starts the install:
    ftp://download.gigabyte.ru/driver/mo...ootdisk_64.exe

    JRAID is for the other ports, not the Marvell ones. The Intel RAID Ports are the fastest anyway, is there any reason why you are not using those? Marvell drivers are not very good yet, so they are slower than the Intel ones for sure.

  6. #816
    Join Date
    Apr 2010
    Location
    Texas
    Posts
    11

    Default Re: Welcome to GIGABYTE Technical Support!

    Hi I'm having trouble with the new system i just built. My specs are as follows:
    Windows Vista Ultimate 64bit
    CPU- AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor
    Graphics- XFX Radeon HD 5830
    Mobo- 790XTA-UD4
    Hard Drive- WDC WD2500JB-57REA) ATA
    RAM- CORSAIR DOMINATOR 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
    PSU- CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC
    Case- COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower
    CDROM- Sony Optiarc Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 48X CD-R 32X CD-RW 2MB Cache SATA DVD Burner with LightScribe LightScribe Support - OEM

    My problem is as that for some reason my sytem wont load an operating system, when i go into the bios and select the HD as first boot, then CDROM as second. So far it keeps going and says that I need to insert a boot disc. Also the only way it has booted windows has been with the windows cd in the CDROM. I have tried to go into and repair my start up boot, but it wont do it. Also for some reason its detecting my Ram as 1333 instead of 1600. Please help me thank you.

  7. #817
    Join Date
    Apr 2010
    Location
    los angeles
    Posts
    8

    Default Re: Welcome to GIGABYTE Technical Support!

    Hello Everyone,
    I just bought an ex58-ud5 bios (F12), with i7 920, geforce 9800gtx+, and 3x2gb ocz platinum OCZ3P1333LV6GK.

    I can't figure what s the problem with my system. Triple channel doesn't work.

    I set for 7-7-7-20(CAS, tRCD, tRP, tRAS), command rate of 2t, and 1.66 volts.

    1 - first I tested each memory individually with memtest boot. all of them worked (i just ran the test for 15 minutes tough - one pass)

    2 - then i tested each slot individually and all of the slots worked . i tested only the white slots. (again I memtest ran for only 15 minutes - one pass)

    3 - The problem is when I run triple channel. I always get errors from memtest. I manage to setup my bios so the memtest would run once with no errors, but then it would crash again. This is very frustrating.

    I believe the problem is with my memories that I will have to Return. but the question is that they passed the memtest individually (for 15 min or one pass). What you guys think should be?

    Thanks

    ex58-ud5
    bios (F12)
    i7 920
    geforce 9800gtx+
    3 x2gb ocz platinum OCZ3P1333LV6GK

  8. #818
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by supremealpha1 View Post
    Hi I'm having trouble with the new system i just built. My specs are as follows:
    Windows Vista Ultimate 64bit
    CPU- AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor
    Graphics- XFX Radeon HD 5830
    Mobo- 790XTA-UD4
    Hard Drive- WDC WD2500JB-57REA) ATA
    RAM- CORSAIR DOMINATOR 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
    PSU- CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC
    Case- COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower
    CDROM- Sony Optiarc Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 48X CD-R 32X CD-RW 2MB Cache SATA DVD Burner with LightScribe LightScribe Support - OEM

    My problem is as that for some reason my sytem wont load an operating system, when i go into the bios and select the HD as first boot, then CDROM as second. So far it keeps going and says that I need to insert a boot disc. Also the only way it has booted windows has been with the windows cd in the CDROM. I have tried to go into and repair my start up boot, but it wont do it. Also for some reason its detecting my Ram as 1333 instead of 1600. Please help me thank you.
    You need to go into advanced BIOS page, then into hard disk boot priority and then move your hard drive by name to the top of the list.

    Your memory would need to be set by you manually.

    Quote Originally Posted by necessario View Post
    Hello Everyone,
    I just bought an ex58-ud5 bios (F12), with i7 920, geforce 9800gtx+, and 3x2gb ocz platinum OCZ3P1333LV6GK.

    I can't figure what s the problem with my system. Triple channel doesn't work.

    I set for 7-7-7-20(CAS, tRCD, tRP, tRAS), command rate of 2t, and 1.66 volts.

    1 - first I tested each memory individually with memtest boot. all of them worked (i just ran the test for 15 minutes tough - one pass)

    2 - then i tested each slot individually and all of the slots worked . i tested only the white slots. (again I memtest ran for only 15 minutes - one pass)

    3 - The problem is when I run triple channel. I always get errors from memtest. I manage to setup my bios so the memtest would run once with no errors, but then it would crash again. This is very frustrating.

    I believe the problem is with my memories that I will have to Return. but the question is that they passed the memtest individually (for 15 min or one pass). What you guys think should be?

    Thanks

    ex58-ud5
    bios (F12)
    i7 920
    geforce 9800gtx+
    3 x2gb ocz platinum OCZ3P1333LV6GK
    I can help you with this, will you please make a new thread with your issues and again and also post your full BIOS settings in a template from my signature.

    It is probably just you are not using the correct settings, I'll help ya get going for sure! Just would like a new thread so we can keep things clear that we discuss.

    This thread was meant as a "Hello" thread really, everyone should always just go ahead and make their own thread, that was it is easier to keep track of who has tried what, ect.

    Thanks

  9. #819
    Join Date
    Apr 2010
    Location
    Texas
    Posts
    11

    Default Re: Welcome to GIGABYTE Technical Support!

    You need to go into advanced BIOS page, then into hard disk boot priority and then move your hard drive by name to the top of the list.

    Your memory would need to be set by you manually.
    I have set my memory to 1600 already thank you. As to the Hard Disk boot priority, I had set it to the top of the list already and when i go to set as first boot instead of cdrom, thats when the problem of operating system not found, also if i have the windows cd in my cdrom in these settings, it will go as if it was a new windows installation.

  10. #820
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    You must change bios settings.
    Code:
    Advanced BIOS Features
    AMD C1E Support [Disabled]
    Virtualization [Disabled]
    AMD K8 Cool&Quiet control [Auto]
    } Hard Disk Boot Priority [Press Enter]
    First Boot Device [Floppy]
    Second Boot Device [Hard Disk]
    Third Boot Device [CDROM]
    Password Check [Setup]
    HDD S.M.A.R.T. Capability [Disabled]
    Away Mode [Disabled]
    Full Screen LOGO Show [Enabled]
    Backup BIOS Image to HDD [Disabled]
    Init Display First [PCI Slot]
    More settings for the HD
    Code:
    Integrated Peripherals
    OnChip IDE Channel [Enabled]
    OnChip SATA Controller [Enabled]
    OnChip SATA Type [Native IDE]
    x OnChip SATA Port4/5 Type IDE
    Onboard ESATA Controller [Enabled]
    Onboard ESATA Mode [IDE]
    Onboard SATA3 controller [Enabled]
    Onboard SATA3 Mode [IDE]
    GSATA RAID Configuration [Press Enter]
    Onboard LAN Function [Enabled]
    Onboard LAN Boot ROM [Disabled]
    } SMART LAN [Press Enter]
    Onboard Audio Function [Enabled]
    Onboard 1394 Function [Enabled]
    Onboard USB 3.0 Controller [Enabled]
    OnChip USB Controller [Enabled]
    USB EHCI Controller [Enabled]
    USB Keyboard Support [Enabled]
    USB Mouse Support [Disabled]
    Legacy USB storage detect [Enabled]
    Onboard Serial Port 1 [3F8/IRQ4]
    Last edited by artdrivers; 04-29-2010 at 09:42 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Thread Information

Users Browsing this Thread

There are currently 31 users browsing this thread. (0 members and 31 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •