Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 88 of 185 FirstFirst ... 3878868788899098138 ... LastLast
Results 871 to 880 of 1847

Thread: Welcome to GIGABYTE Technical Support!




  1. #871
    Join Date
    May 2010
    Location
    USA
    Posts
    2

    Default Re: Welcome to GIGABYTE Technical Support!

    EDIT:

    Deleted due to 'lack-of-interest'
    Last edited by aL1; 05-25-2010 at 09:06 AM.

  2. #872
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by aL1 View Post
    EDIT:

    Deleted due to 'lack-of-interest'
    What do you mean?

    If you need help with something let us know. Sometimes posting here in this thread people do not notice your post because this is just meant as a "Hello" type of thread so not all members check this.

    If you do need help feel free to let us know what you need help with, or create a new thread with your issue so we can help.

    We are interested in helping you, so please don't think because no one replied to you in x amount of hours that no one will, we try our best to always help everyone just sometimes it takes a while before someone is around that can offer you advice.

    So, please do let us know if you need help with something.

  3. #873
    Join Date
    May 2010
    Location
    USA
    Posts
    2

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by Lsdmeasap View Post
    What do you mean?

    If you need help with something let us know. Sometimes posting here in this thread people do not notice your post because this is just meant as a "Hello" type of thread so not all members check this.

    If you do need help feel free to let us know what you need help with, or create a new thread with your issue so we can help.

    We are interested in helping you, so please don't think because no one replied to you in x amount of hours that no one will, we try our best to always help everyone just sometimes it takes a while before someone is around that can offer you advice.

    So, please do let us know if you need help with something.
    Thanks, I was a little hasty to 'delete', but I will post again if needed- aL

  4. #874
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Ahh ok, sorry no one got back to you sooner!

    So for now you are ok then I take it? If so great to hear, if not let us know

  5. #875
    Join Date
    May 2010
    Location
    newcastle Australia
    Posts
    9

    Default Real help needed EP31-DS3L and corsair Ram modules

    I hope that I can get someone with atleast more knowledge than myself to WALK me through the BIOS, CPU-Z and Memtest86+ to help me completely fix my board<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    1. EP31-DS3L motherboard <o:p></o:p>
    2. Intel duo e7400 processor,<o:p></o:p>
    3. 4 x CM2x1024-8500c5d ram modules.<o:p></o:p>
    a. These modules indicate on labelling “CM2x1024-8500c5d, xms2-8500, 1024mb, 1066mhz, 5.5.5.15, 2.10v, ver1.5”<o:p></o:p>
    All components are compatible according to the Gigabyte website<o:p></o:p>
    History <o:p></o:p>
    My computer was running fine until I upgraded to windows 7 ultimate.<o:p></o:p>
    I am now constantly am getting BSOD's <o:p></o:p>
    They started off being (memory management) or (page pool error in non paged area)<o:p></o:p>
    So I followed the advice of a lot of techs at first such as to run MEMtest86+ <o:p></o:p>
    I did so for at least 10 full tests NO ERRORS at a timing of 5.5.5.15 although this was by total guess work in the bios … However, BIG - however, I still got the BSOD's<o:p></o:p>
    So I checked out the hard drive re installed the operating system..Etc.. Still same issue...<o:p></o:p>
    Ran memtest86+ again although this time i PROBE the memory instead of using the bios settings.... this is when errors started filing through... it indicated that module 4 at 3564mb was failing …. So I remove and retested<o:p></o:p>
    I probed the memory again …..Fine - no errors- retested no errors (10 tests)<o:p></o:p>
    Restarted computer, bang BSOD … (memory management) ….restarted BSOD (IRQ not less than equal) - I think<o:p></o:p>
    <o:p> </o:p>
    Restarted in diagnostic repair mode. Sort out more help was told to run CPU-Z <o:p></o:p>
    SPD reports incorrect model numbers and module sizes..<o:p></o:p>
    Memory reports more memory than I have fitted…so how can I pass all memory test and get all wrong data here.<o:p></o:p>
    Yes I have tried each module on its own.. memtest all fine …<o:p></o:p>
    If we could please start by some guru giving me the best settings for this type of ram in my bios noting the type of CPU I have E7400 Intel Duo 2.8 GHz<o:p></o:p>
    I do personally believe it is Memory related…. And the test indicate this however which ones and how can I conclusively prove each module….<o:p></o:p>

  6. #876
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: Welcome to GIGABYTE Technical Support!

    I had this EP31-DS3L board and it became like this for about 3 months of torture. Probably each time the system boots it automaticly sets some value to the Static Tread and the Static tread value (is shown as the Perormance level in the Everest software). So no ammount of testing could ever predict what the system will be the next time it boots. You can try finding what is the best value to set manually to the Static tread, leave the static tread delay on auto or 0, there should be no delay. With 1066 memory and 1066 Fsb I assume it is something like 5, usually you have to burn test the cpu for about 10 minutes with linx or something and then see what is the lower Static tread that the system boots with set manually. Also you have to monitor the the memory module dimm delay each time system boots because that also changes. and for your system to be really reliable it has to be the same numbers each time. Probably you system tries to boot with setting of 4 sometimes.

    Last edited by yuu; 05-30-2010 at 06:36 PM.

  7. #877
    Join Date
    May 2010
    Location
    newcastle Australia
    Posts
    9

    Default Re: Welcome to GIGABYTE Technical Support!

    Thanks for the quick reply,
    Firstly, the award bios limited in functionality..
    How do i adjust the "static tread delay" where is it located in the bios..?
    What programs can i used to define the best possible settings..?

    would you or anyone else know the settings for the award bios..!

    i have no experience with the dimm delay settings ...so a walk though would be good if you or someone else has the time to do so !

  8. #878
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by Fringe View Post
    Firstly, the award bios limited in functionality..
    Attachment 2567
    Enter the bios, press Ctrl + F1, and then under the MIT menu (the first thing at the top of the list, or at the bottom if bios is old), then advanced timings, there is Tread, no dimm delay. should be sufficient to set it for now and then search for other reasons if the problem stays.

    I have set 400 fsb and 400Mhz dram, with tread 8. The lower the fsb and the higher the dram, the lower is the number you can set, at some point it will refuse to boot, then you know to set it to +1 bigger value.

  9. #879
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Are you running 333 FSB? If so tRD (Static tRead Value) of 6-8 should be fine

    You need to set your ram voltage to spec amount, set MCH voltage to 1.2-1.24 for 4GB, and set performance enhance on standard

  10. #880
    Join Date
    May 2010
    Location
    newcastle Australia
    Posts
    9

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by yuu View Post
    Attachment 2567
    Enter the bios, press Ctrl + F1, and then under the MIT menu (the first thing at the top of the list, or at the bottom if bios is old), then advanced timings, there is Tread, no dimm delay. should be sufficient to set it for now and then search for other reasons if the problem stays.

    I have set 400 fsb and 400Mhz dram, with tread 8. The lower the fsb and the higher the dram, the lower is the number you can set, at some point it will refuse to boot, then you know to set it to +1 bigger value.

    Thank you i will reboot and try this... i will also take a pic of Bios


Thread Information

Users Browsing this Thread

There are currently 39 users browsing this thread. (0 members and 39 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •