Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 94 of 185 FirstFirst ... 44849293949596104144 ... LastLast
Results 931 to 940 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #931
    Join Date
    Feb 2009
    Posts
    17

    Default Re: Welcome to GIGABYTE Technical Support!

    its a common issue with gigabyte am3 motherboard bios's.

  2. #932
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    It's a common issue with Windows 7 Power Options. If you could look in BIOS M.I.T. and it reads normal than it is more than likely The Windows Power Option. Windows 7 defaults to Balanced mode right from Windows Setup. You would need to set it to High Performance Mode for it to change from a 4 multiplier to a 14 multiplier.
    This is a common fix for the issue. After performing the Power Option Change to High Performance mode your system will Throttle up to the maximum rated cpu speed and stay there. Now it will show the full speed in CPUZ. Balanced Mode only throttles the CPU when it is neccesary, and CPUZ will oonly read the throttle down state. Instructions on how to change it is below. I would suggest this be done be done at first on recommended CPU frequency of 200Mhz. After the change is made then you may want to raise the cpu frequency for overclocking.
    Power Plan - Select - Windows 7 Forums
    Last edited by artdrivers; 06-28-2010 at 01:06 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  3. #933
    Join Date
    Jun 2010
    Location
    poland
    Posts
    12

    Default Re: Welcome to GIGABYTE Technical Support!

    Blank screen after EF firmware change to hybrid.

    I tried to unlock one core in my Phenom on GA-MA790X-UD4 motherboard.
    I succesfully upgraded EC Firmware in BIOS (to hybrid), saved presets, then reeboted, and monitor is completely blank, no post screen, etc. CD-ROM seems to work, hard drive speeds up, fans are on. No beeps from motherboard. Any ideas?

  4. #934
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    You may want to try to clear cmos.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #935
    Join Date
    Jun 2010
    Location
    poland
    Posts
    12

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by artdrivers View Post
    You may want to try to clear cmos.
    Didn't help. I also removed graphic card and memory. Didn't help. Motherboard only gives beeps.

  6. #936
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    I replied in your thread, maybe you did not clear CMOS fully so please try the method I mentioned

  7. #937
    Join Date
    Jul 2010
    Location
    PaKiStAn
    Posts
    15

    Default Re: Welcome to GIGABYTE Technical Support!

    @GIGABYTE technical helper
    Check out my thread...... and help me......
    http://forums.tweaktown.com/f69/ga-e...problem-40414/
    Never forget "ThE lEmOn"

  8. #938
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    Coldplayer a new BIOS just has come out for a GA-MA770T-UD3P (rev. 1.0) BIOS F9
    http://www.gigabyte.us/Support/Mothe...ctID=3096&ver=
    Last edited by artdrivers; 07-02-2010 at 09:00 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  9. #939
    Join Date
    Jul 2010
    Location
    PaKiStAn
    Posts
    15

    Default Re: Welcome to GIGABYTE Technical Support!

    Never forget "ThE lEmOn"

  10. #940
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    No need to bump this thread Hassan, we will get to your thread for sure

Thread Information

Users Browsing this Thread

There are currently 37 users browsing this thread. (0 members and 37 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •