Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 96 of 185 FirstFirst ... 46869495969798106146 ... LastLast
Results 951 to 960 of 1846

Thread: Welcome to GIGABYTE Technical Support!




  1. #951
    Join Date
    May 2010
    Location
    Otherland
    Posts
    7

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by Lsdmeasap View Post
    Sorry, I still am not really sure what you are after here?

    There is only two chips (Controllers), not three. ICH10R and P45
    Actually there are much more chips on a mobo then just P45 & ICH10.... i.e most have a chip ( some winbond, others have intel ) to read out system data like fan speed/cpu temps/Vcore, there are chips for firewire, audio, ethernet , 2 bios chips.... etc... etc...

    The 2 main chips aka P45 ( called NORTHBRIDGE ) and ICH10 ( called SOUTHBRIDGE ) have or are connected to several controllers ( chips ! )...

    You can find out about these by booting a Linux Live distro or Ubuntu i.e. , go to terminal and run lspci -nnnvvvxxx

    My GA-EP45-DS3 has 23 of them... ( there are 8 for USB only !!!! )

    In Terminal you can get a lot of information about the apci tables ( RSDT, FACP, FACS, HPET, MCFG, SSDT, DSDT ...)
    These tables are written "basic software code" and without them no operating system would fully work on our mobos , most of them not even boot at all
    ( damn... where are all the drivers i need to boot ? ) !!!! They're telling all OSs like Windoof / Linux / MacOS etc what hardware is available and at which adresses it can be found...


    Anyway... looks like i'm in the wrong thread/forum to ask these kind of question

    No offence...
    Last edited by !Xabbu; 07-22-2010 at 01:25 AM.
    GA-EP45-DS3 / Q9550 / 4 KVR800D2N6K2 / 8800GT / WD2500AAK / SAMSUNGHD203WI

  2. #952
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    Just a thought. Can you find a PCIE card and drop it in one of the slots and see if it narrows it down for you? You know process of elimination?
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  3. #953
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    I do know what you mean, about tons of chips and controllers on the board, I guess I am just not fully sure what you are asking as I do not use those systems.

    As for what you asked about, they are controlled by the two controllers I mentioned but as far as what else they are routed through before/after I couldn't say but the diagram provided makes it look like nothing else.

  4. #954
    Join Date
    May 2010
    Location
    Otherland
    Posts
    7

    Default PCI Slots & their controllers

    @ artdrivers

    Yes, thought about it but no go.
    In the DSDT table ( Differentiated System Description Table ) we can tweak behaviour of all the different slots etc... and by commenting out the definition blocks and their related Power Managment Registers we can "see" their location but unfortunately nothing about the controllers.
    I.e. you can disable almost everything except for basic stuff like PM and system still boots though...

    @ lsdmeasap

    Code:
    ...but the diagram provided makes it look like nothing else.
    That's why i asked you to look at my codebox from 1st question. This snippet is an output from Terminal which clearly states that there are 3 controllers in duty for pci not 2.

    Here you can see all Controllers of a GA-EP45-DS3 mobo....

    Code:
    00:00.0 Host bridge [0600]: Intel Corporation Eaglelake DRAM Controller [8086:2e20] (rev 02)
    00:06.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2e29] (rev 02)
    00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
    00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
    00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
    00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
    00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]
    00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4 [8086:3a46]
    00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48]
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
    00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22]
    00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
    01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8800 GT [10de:0611] (rev a2)
    03:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller [197b:2368]
    04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
    05:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
    All of them are either inside of P45/ICH10 or located somewhere on the board.

    P45 & ICH10 are only "team managers" coordinating all in/output from these chips, controllers or whatever one might call them...
    This becomes obvious when you start digging deeper and be courious enough to find out what is really going on.

    I want to know and i want to get the best performance out of my machine....

    and before you even start thinking.... no i'm not a

    have a nice one...
    Last edited by !Xabbu; 07-23-2010 at 04:08 AM.
    GA-EP45-DS3 / Q9550 / 4 KVR800D2N6K2 / 8800GT / WD2500AAK / SAMSUNGHD203WI

  5. #955
    Join Date
    May 2010
    Location
    -
    Posts
    110

    Default Re: Welcome to GIGABYTE Technical Support!

    Xabbu

    2 of them are ethernet, you have disabled one. and one seems empty, that is what everest says.

    ""PCI Express Controller
    PCI-E 1.0 x1 port #1 Empty
    PCI-E 1.0 x1 port #4 In Use @ x1 (JMicron JMB368 SATA-II RAID Controller)
    PCI-E 1.0 x1 port #5 In Use @ x1 (Realtek RTL8168C/8111C PCI-E Gigabit Ethernet Adapter)
    PCI-E 1.0 x1 port #6 In Use @ x1 (Realtek RTL8168C/8111C PCI-E Gigabit Ethernet Adapter)""

    one is the jmicron ide controller. in fact it is a sata raid.
    the usb and sata perhaps using the 2 invisible Pcie's #2 and #3
    the firewire seems to be legacy pci connected to the ich10.
    the sound probaly connects to a codec.
    the bios or the ITE chip are lpc connected, then the 2 bioses connected to the ITE?

    Despite so many inerrupt request lost to the USb, 6 irq's at least, some of them are being shared with ide, eth, vga or sound, disabling the usb and therefore making the cpu more responsive may not result a performance boost at all.
    Last edited by yuu; 07-23-2010 at 06:38 AM.

  6. #956
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Welcome to GIGABYTE Technical Support!

    By the block diagram it does appear that the Realtek RTL8168C/8111C PCI-E Gigabit Ethernet Adapter is on the same line as the PCI express bus.

    Uploaded with ImageShack.us
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  7. #957
    Join Date
    Jul 2010
    Location
    USA Michigan
    Posts
    7

    Default Re: Welcome to GIGABYTE Technical Support!

    Greetings all :)

    New build here, having some voltage issue ATM, problem is that my 1600 ram shows up as 1066, from what i have seen this isnt uncommon. i will post my BIOS template below and my Sig contains my system setup, other than the fact that im running WIN7 64bit
    Checked each stick by removing them all and rebooting with one at a time, all went well

    If something seems amiss could you help me out please

    for the time being theres no OCing going on, but any thing that could help with the voltage issue would be Great........Thanks


    BIOS Template - Gigabyte GA-X58 - UD3R MB Intelligent Tweaker (M.I.T.)

    Code:
     
    CPU Clock Ratio [21x] 
    CPUFrequency 2.8GHz (133*21)
    
    >Advanced CPU Core Features [Press Enter]:
    Intel(R) Turbo Boost Tech [Disabled]
    CPU Cores Enabled [All]
    CPU Multi Threading [Enabled]
    CPU Enhanced Halt (C1E) [Enabled] 
    C3/C6/C7 State Support [Disabled]
    CPU Thermal Monitor [Enabled]
    CPU EIST Function [Enabled]
    Bi-Directional PROCHOT [Enabled]
     
    QPI Clock Ratio [Auto] 
    QPI Link Speed 4.8GHz 
    Uncore Clock Ratio [Auto] 
    Uncore Frequency 3200MHz
    >>>>> Standard Clock Control
      
    Base Clock(BCLK) Control [Enabled] 
    (BCLK Frequency (Mhz) [133] 
    Extreme Memory Profile (X.M.P.) [Disabled]
    System Momory Multiplier (SPD) [12.0] 
    Memory Frequency (MHz) 1066 1600 
    PCI Express Frequency (MHz) [100] 
     
    >>>>> Advanced Clock Control 
    CPU Clock Drive [ 800mV]
    PCI Express Clock Drive [ 900mV]
    CPU Clock Skew [ 0ps]
    IOH Clock Skew [ 0ps]
     
    Extreme Memory Profile (X.M.P.) [Disabled] 
    System Memory Multiplier (SPD) [12.0] 
    memory frequency (mhz) 1066 1600
    Performance Enhance [Standard]
    DRAM Timing Selectable (SPD) [Expert] 
    Profile DDR Voltage 1.5V Profile 
    QPI Voltage 1.175V 
    Channel Interleaving 6 [Auto] 
    Rank Interleaving 4 [Auto] 
     
    >>>>> Channel A 
    >Channel A Timing Settings [Press Enter] 
    >Channel A Turnaround Settings [Press Enter] 
    >>>>> Channel B 
    >Channel B Timing Settings [Press Enter] 
    >Channel B Turnaround Settings [Press Enter] 
    >>>>> Channel C 
    >Channel C Timing Settings [Press Enter] 
    >Channel C Turnaround Settings [Press Enter] 
     
    Channel A
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel B 
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel C
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    >>>>>Channel A Advanced Timing Control
    tRC 27 [AUTO]
    tRRD 4 [AUTO]
    tWTR 4 [AUTO]
    tWR 8 [AUTO] tWTP 19 [AUTO]
    tWL 7 [AUTO]
    tRFC 60 [AUTO]
    tRTP 4 [AUTO]
    tFAW 16 [AUTO]
    Command Rate (CMD) 1 [2]
    
    >>>>>Channel A Misc Timing Control 
    B2B CAS Delay - [AUTO]
    Round Trip Latency 51 [AUTO] 
    
    Advanced Voltage Control [Press Enter]:
    Load Line Calibration [Standard]
    CPU Vcore 1.21250v [AUTO] 
    X Dynamic Vcore (DVID) +0.00000V AUTO
    QPI/VTT Voltage 1.175v [AUTO]
    CPU PLL 1.800v [AUTO]
    
    >>>MCH / ICH
    
    PCIE 1.500v [AUTO]
    QPI PLL 1.100v [AUTO]
    IOH Core 1.100v [AUTO]
    ICH I/O 1.500v [AUTO]
    ICH Core 1.100v [AUTO]
    
    
    >>>DRAM
    
    DRAM Voltage 1.500v [1.600V]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO] 
     
    CMOS Setup Utility
    Isochronous Support [Enabled] 
    Virtualization Technology [Enabled]
    Much Grass for the help
    Last edited by Taurus; 07-23-2010 at 10:41 AM.
    Motherboard: GigaByte GA-X58A-UD3R Rev#2: Bios Version: FA
    Cpu: Intel i7 930 (2.8 Ghz)
    Ram: G-Skill F3-12800CL8T-6TGBRM DDR3-1600 PC3-12800 2048x3 CL8-8-8-24 (1.6v)
    PSU: Corsair HX1000
    CPU Cooler: Corsair H50
    GPU: BFG 285GTX SLI
    Case: Atnec 1200

  8. #958
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Welcome to GIGABYTE Technical Support!

    Quote Originally Posted by !Xabbu View Post
    @ artdrivers

    Yes, thought about it but no go.
    In the DSDT table ( Differentiated System Description Table ) we can tweak behaviour of all the different slots etc... and by commenting out the definition blocks and their related Power Managment Registers we can "see" their location but unfortunately nothing about the controllers.
    I.e. you can disable almost everything except for basic stuff like PM and system still boots though...

    @ lsdmeasap

    Code:
    ...but the diagram provided makes it look like nothing else.
    That's why i asked you to look at my codebox from 1st question. This snippet is an output from Terminal which clearly states that there are 3 controllers in duty for pci not 2.

    Here you can see all Controllers of a GA-EP45-DS3 mobo....

    Code:
    00:00.0 Host bridge [0600]: Intel Corporation Eaglelake DRAM Controller [8086:2e20] (rev 02)
    00:06.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2e29] (rev 02)
    00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
    00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
    00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
    00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
    00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]
    00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4 [8086:3a46]
    00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48]
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
    00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22]
    00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
    01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8800 GT [10de:0611] (rev a2)
    03:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller [197b:2368]
    04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
    05:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
    All of them are either inside of P45/ICH10 or located somewhere on the board.

    P45 & ICH10 are only "team managers" coordinating all in/output from these chips, controllers or whatever one might call them...
    This becomes obvious when you start digging deeper and be courious enough to find out what is really going on.

    I want to know and i want to get the best performance out of my machine....

    and before you even start thinking.... no i'm not a

    have a nice one...
    I got what you mean, I just can't find anything for windows that tells us what you are trying to find out.

    I thought this might, but it's not giving the same output so I don't think it helps any



    Quote Originally Posted by Taurus View Post
    Greetings all :)

    New build here, having some voltage issue ATM, problem is that my 1600 ram shows up as 1066, from what i have seen this isnt uncommon. i will post my BIOS template below and my Sig contains my system setup, other than the fact that im running WIN7 64bit
    Checked each stick by removing them all and rebooting with one at a time, all went well

    If something seems amiss could you help me out please

    for the time being theres no OCing going on, but any thing that could help with the voltage issue would be Great........Thanks


    BIOS Template - Gigabyte GA-X58 - UD3R MB Intelligent Tweaker (M.I.T.)

    Code:
     
    CPU Clock Ratio [21x] 
    CPUFrequency 2.8GHz (133*21)
    
    >Advanced CPU Core Features [Press Enter]:
    Intel(R) Turbo Boost Tech [Disabled]
    CPU Cores Enabled [All]
    CPU Multi Threading [Enabled]
    CPU Enhanced Halt (C1E) [Enabled] 
    C3/C6/C7 State Support [Disabled]
    CPU Thermal Monitor [Enabled]
    CPU EIST Function [Enabled]
    Bi-Directional PROCHOT [Enabled]
     
    QPI Clock Ratio [Auto] 
    QPI Link Speed 4.8GHz 
    Uncore Clock Ratio [Auto] 
    Uncore Frequency 3200MHz
    >>>>> Standard Clock Control
      
    Base Clock(BCLK) Control [Enabled] 
    (BCLK Frequency (Mhz) [133] 
    Extreme Memory Profile (X.M.P.) [Disabled]
    System Momory Multiplier (SPD) [12.0] 
    Memory Frequency (MHz) 1066 1600 
    PCI Express Frequency (MHz) [100] 
     
    >>>>> Advanced Clock Control 
    CPU Clock Drive [ 800mV]
    PCI Express Clock Drive [ 900mV]
    CPU Clock Skew [ 0ps]
    IOH Clock Skew [ 0ps]
     
    Extreme Memory Profile (X.M.P.) [Disabled] 
    System Memory Multiplier (SPD) [12.0] 
    memory frequency (mhz) 1066 1600
    Performance Enhance [Standard]
    DRAM Timing Selectable (SPD) [Expert] 
    Profile DDR Voltage 1.5V Profile 
    QPI Voltage 1.175V 
    Channel Interleaving 6 [Auto] 
    Rank Interleaving 4 [Auto] 
     
    >>>>> Channel A 
    >Channel A Timing Settings [Press Enter] 
    >Channel A Turnaround Settings [Press Enter] 
    >>>>> Channel B 
    >Channel B Timing Settings [Press Enter] 
    >Channel B Turnaround Settings [Press Enter] 
    >>>>> Channel C 
    >Channel C Timing Settings [Press Enter] 
    >Channel C Turnaround Settings [Press Enter] 
     
    Channel A
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel B 
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    Channel C
    CAS Latency Time 8 [8]
    tRCD 8 [8]
    tRP 8 [8]
    tRAS 20 [24]
     
    >>>>>Channel A Advanced Timing Control
    tRC 27 [AUTO]
    tRRD 4 [AUTO]
    tWTR 4 [AUTO]
    tWR 8 [AUTO] tWTP 19 [AUTO]
    tWL 7 [AUTO]
    tRFC 60 [AUTO]
    tRTP 4 [AUTO]
    tFAW 16 [AUTO]
    Command Rate (CMD) 1 [2]
    
    >>>>>Channel A Misc Timing Control 
    B2B CAS Delay - [AUTO]
    Round Trip Latency 51 [AUTO] 
    
    Advanced Voltage Control [Press Enter]:
    Load Line Calibration [Standard]
    CPU Vcore 1.21250v [AUTO] 
    X Dynamic Vcore (DVID) +0.00000V AUTO
    QPI/VTT Voltage 1.175v [AUTO]
    CPU PLL 1.800v [AUTO]
    
    >>>MCH / ICH
    
    PCIE 1.500v [AUTO]
    QPI PLL 1.100v [AUTO]
    IOH Core 1.100v [AUTO]
    ICH I/O 1.500v [AUTO]
    ICH Core 1.100v [AUTO]
    
    
    >>>DRAM
    
    DRAM Voltage 1.500v [1.600V]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO] 
     
    CMOS Setup Utility
    Isochronous Support [Enabled] 
    Virtualization Technology [Enabled]
    Much Grass for the help
    Please make a new thread with all your info here, so we can better keep track of this as we help.

    Do you see a Red Warning box when you enter the MIT Section of the BIOS?

    Can you please link us to your memory kit.

    I see you are not setting your QPI/Vtt this may be the issue, and surely will be if you are seeing a red warning box.

    I also see you have C1E and EIST enabled, Intel Speedstep, so your CPU and memory would be downclocked when idle so this may be the issue as well.

  9. #959
    Join Date
    Feb 2010
    Location
    Denver,CO
    Posts
    27

    Wink Re: Welcome to GIGABYTE Technical Support!

    HI,
    Building a new system, X58a-ud5 rev. 2 with Corsair 2000mhz memory, have not decided on cpu, but thinking 980x, 5870's in crossfireX. HAFX case, corsair 1000w psu, LG blue ray player, X-Fi Tit sound card and 28 in monitor 1900x1200. WD 600gb VR sata 3 drives x2
    Question is: running the WD hard drives off the sata 3 in raid 0, is it any faster then running them off the sata 2 and also can you use the sata 3 in raid 0 as a boot drive. Then if this is possible, is there any drivers you need to install and when? I have everything except the monitor and cpu, which I plan on getting next week and installing the week after. Windows 7 PRO 64bit.
    Any help/questions...???

  10. #960
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Welcome to GIGABYTE Technical Support!

    sata3 ports will be faster than the sata2 ports but the marvell drivers arnt very good,you will have to install the sata3 drivers and enable ahci mode in the bios before you install the os,yes you can use sata3 raid0 as boot drive,you will also run 2000mhz ram using a 980x better than you would with a 930/920 due to using less uncore freq
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 37 users browsing this thread. (0 members and 37 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •