Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: ga-p35-ds3r question




  1. #1
    Join Date
    Oct 2007
    Location
    Victoria BC
    Posts
    26

    Default ga-p35-ds3r question

    Guys ;Just finished putting together a system with this MB,a e6850, 8800 gts,corsair 620hx psu, antec 900 case,etc.
    The first thing I did after firing it up was go into the bios to monitor temps.
    The one thing that concerned was "vcore failed" in the "PC Health Status". This is before I made any changes in the bios.

    I also noticed my system temp. to be quite high, around 52 degrees although I can touch the NB heat sink which doesn't seem overly hot.
    I noticed when building this system the NB heat sink being loose although the plastic pins where properly engaged.

    If you need any extra info please advice

    Cheers
    Fawlty

  2. #2
    Join Date
    Oct 2007
    Location
    Victoria BC
    Posts
    26

    Default Re: ga-p35-ds3r question

    Well in case anyone else runs into this problem, I went from the f5 to the f8 bios and it fixed the situation.

    Fawlty

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •