Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Sensor Configuration for P35-DS4 Rev 2.0

  1. #1
    Join Date
    Jan 2008

    Default Sensor Configuration for P35-DS4 Rev 2.0

    Does anyone (you listening, Janus?) have a configuration file, or the howto, for /etc/sensors.conf on a DS4 so you see the proper names, instead of daft labels like:
    temp1 (yes, gkrellm shows two)

    I am guessing that these are respectively the:
    Case temp (or maybe the hard disk)
    The diode between the two cores
    The thermistor on CPU 1 (it seems to match the ISA Core 0 temp)
    The thermistor on CPU 2 (ditto, Core 1)
    Nothing in particular

    Now I have reverted my Rev 2.0 board to bios F8 the CPU fan is back to 725 RPM load, 320 RPM idle, and the temps are nice and cool:

    fan1: 725 RPM (min = 0 RPM)
    fan2: 0 RPM (min = 0 RPM)
    fan3: 0 RPM (min = 0 RPM)
    temp1: +39C (low = +127C, high = +127C) sensor = thermistor
    temp2: +40C (low = +127C, high = +70C) sensor = diode
    temp3: -2C (low = +127C, high = +127C) sensor = thermistor
    vid: +0.000 V

    Adapter: ISA adapter
    Core 0: +36C (high = +85C)

    Adapter: ISA adapter
    Core 1: +35C (high = +85C)

    Now all I need to do is get those labels straight ...

  2. #2
    Join Date
    Jul 2007
    Taipei, Taiwan

    Default Re: Sensor Configuration for P35-DS4 Rev 2.0

    user manual?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts