Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 22 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 212

Thread: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide




  1. #41
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Somebody help me please, try and try and NOT work..
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  2. #42
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Sorry for the late reply today, I have had a few things going on that has kept me offline!

    Please give me a link to your ram, or the page you bought it from. 2.2-2.3 is not likely needed, that is the warrantied voltages. Anything over 2.2 I advise you put a fan directly on the ram as it is going to get hot and die very quickly if you do not. 2.1 will likely be plenty.

    MCH Voltage is likely your issue, and maybe a bit more CPU Voltage as your vdrop and vdroop bring that under stock VID so you may need a bit more.

    And of course, your ram may not run stable at that high speed being 2x2. I also do not see anyway with your FSB at 377 that you could be using 1136 as your ram speed. I suppose you mean 1131 (3.00+ x 377) (I know, just saying)

    That is on a Very tight Northbridge Strap and you likely could never get that stable using the 266/1066 strap. Try the 1333 or 1600 straps. Use a memory multi with B or # for 333/1333 strap and no letter for 400/1600 strap. That will allow your Northbridge to run at a faster speed with looser timings and help you get your ram stable maybe at that speed. And yes, there will not be a 3.00 multi on the 333 strap, so you will need to use a different multi with a slower ram speed or change your FSB and use a different multi for the same speed

    So try this for what you had above as far as CPU Speed >>>

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [377]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.66] << This is the 400/1600 Strap (not letter on your board) will be 1002Mhz ram speed. Just for now, after you get stable I can help you with a higher FSB for more ram speed if you like

    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]


    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________ 3-5
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-6
    Refresh to ACT Delay______________ 52-65
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________7-12
    Static tRead Phase Adjust________ [Auto] << Always leave

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] =2.1V
    PCI-E OverVoltage Control_ [+0.1V] << For stability
    FSB OverVoltage Control___ [+0.1V] << For stability
    (G)MCH OverVoltage Control [+0.2V - +0.3] << Needed for 2x2 ram
    CPU Voltage Control_______ [1.40-1.4?] << you may need more then you have above, but I would suggest you slow the ram down for now and use a ram mulit from my suggestions above and you then should not maybe need so much voltage here. Also once you add MCH voltage you will be more stable as well, but not likely at that ram speed and strap combo

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

    Or here try this for a better overclock of your CPU and ram speed closer to what you have above (not all ram will go that fast, keep in mind) >>>

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [425]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.66] = 1130

    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]


    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18

    ACT to ACT Delay (tRRD)_________ 3-5
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-8
    Refresh to ACT Delay______________ 52-65
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________8-12
    Static tRead Phase Adjust________ [Auto] << Always leave

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V - +0.4] =2.1V -2.2V
    PCI-E OverVoltage Control_ [+0.1V] << For stability
    FSB OverVoltage Control___ [+0.1V] << For stability
    (G)MCH OverVoltage Control [+0.2V - +0.3] << Needed for 2x2 ram
    CPU Voltage Control_______ [1.45-1.50] << Set high because of your vdrop/vdroop, may need more or less all depends on your chip
    Last edited by Lsdmeasap; 10-28-2008 at 02:36 PM.

  3. #43
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Hi sr good morning thank,Yesterday try any settings.--->>

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [334]
    PCI Express Frequency (Mhz)_______ [102]--->>> FAIL¡¡ my bios reset again again :-(
    Return to 100

    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ cant remember the Multiplier but te ram speed ->1110
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________ 3-5-->> auto
    Rank Write to READ Delay________ 3-6--->>auto
    Write to Precharge Delay_________ 4-8--->>auto
    Refresh to ACT Delay______________ 52-65-->>52
    Read to Precharge Delay__________ 3-5-->auto
    Static tRead Value_______________8-12-->>>auto
    Static tRead Phase Adjust________ [Auto] << Always leave-->>23

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V - +0.4] =2.1V -2.2V--->> always run in +4 IS BAD??? my memory say ''2.200 or 2.300 for 1066 5-5-5-15''
    PCI-E OverVoltage Control_ [+0.1V] << For stability---->> is sure to touch it-->> me set in NORMAL..
    FSB OverVoltage Control___ [+0.1V] << For stability--->> +1
    (G)MCH OverVoltage Control [+0.2V - +0.3]--->>> +2

    Vcore-->> 1.3850 bios--->> In windows 1.3440 and full 1.3120.

    Un to 1.4000??? is equal ---1.3440 in windows but ''the minimun'' down in full is 1.3280..

    the is important no?


    The system runs ''OK'' in test a 1110 Mhz 5-5-5-15 , but in some games ''fail'' ''''The controller of screen I stop working but I recover''''--->>WTF ¡¡¡

    And stop the OC and leave in my old settings...

    Need the +1 IN PCI??????? sure sure???? I am afraid to damage it
    or need more vcore???

    I think that I need more vcore,I do not want MORE Mhz in my core... 3000 Mhz is OK..
    I need to make the memory stable as this one now 1110 Mhz.. no need more speed ;-)

    Thanks ¡¡¡¡¡¡



    Link the my RAM

    http://oc.adata.com.tw/1_product_det...?pid=AD21066EU

    Have a fan On my memori. is ''cold'' XDDD very cold..

    My temps--->>

    Cpu-->> 28º
    Mother-->> 40º
    HDD-->>36
    HDD2-->>34
    GPU-->>56º Stock cooler 9800gtx standard NO OC EDITION

    Have a TX 750 corsair :b

    Need ''realy is'' Bandwidth 3000 Mhz in CPU is OK for me, and 1110 or 1200 in my memory

    If cannot run 1110 o more... Then need MORE fsb and MORE Mhz in CPU... no???


    Thanks for help Sr is very important for me


    can try 430*7--->>>3010??????

    max MCH in my mother is +3 :S.... no damage???? is extreme voltage?
    Last edited by ADDIER; 10-29-2008 at 03:01 AM.
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  4. #44
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Yes PCI +.1 is fine

    You need to use all the highest ram timings I gave you until you get stable. Yes, you can use +.4 on your ram it will just be hot for sure so add a fan over it. What you see on the ram sticker for spec's is warrantied voltage, not always what is needed

    And yes, you likely need more vcore as 1.34 may not be enough and 1.312 at load may be worse. Which may be why you crash in games.

    So please set all timings I gave you to the highest and then see how it acts, if not good then please add more Vcore. Your CPU is fine for sure and you should not worry until you get into 1.45+ in windows (Which you for sure wont need)

    You will have much better luck with using a memory multiplier without a Letter/symbol on it, or use a smaller one as your ram may not run that fast and be stable at all

  5. #45
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Why showme this error¿¿¿

    ''''The controller of screen I stop working but I recover''''--->>WTF ¡¡¡

    Vcore??
    o Pci-e????


    Thanks sr and good day
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  6. #46
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    No work ¡¡¡ always in 10/15 min playing show

    The controller of screen I stop working but I recover

    Why????? drivers?? or what??? please tellme
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  7. #47
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Yes, that is Either drivers or Your card may be overheating, could be volts but more likely not.

    Does it do that at stock CPU/ram speed when you game? If so it is likely the driver or card overheating.

    Have you tried turning up the cards fan speed, often Default fan speed are too low on some cards. You can use ATITools (yes it will work for Nvidia) or Rivatuner to set fan speeds. If you have Nvidia you should also be able to change fan speeds in the Nvidia control panel. What card do you have anyway, and are you using the latest BIOS?

  8. #48
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    No no my card sr is cold.... 70º full 49º Idle.... i think the drivers is a problem , why ''alwayls'' show ''nvdmnvd'' fail this is a driver no??????

    Or show ''kernel32''...o 'Crysis.exe' olga play crysis war and NOTfail in this game only fail in ''crysis'' and ''crysis warhead''

    yesterday play whitout overclock and NOT fail... but reinstall a 178.24 drivers Not that could be..
    My card is 9800 Gtx, never flash my card have a stock bios :S...

    -----------------------------

    Try up only a FSB (333*9--- 1066) (33*9--10**) and FAIL, NO SHOW BLUE SCREEN.... only reset, but the ''settings'' no reset...

    I am sad believe that this motherboard is very simple, not work ''OK'' extreme Vdrop/vdroop and ''simple settings'' in V ....

    Change my board????????? :-( :-(

    That thinks--- Ga Ep45-Dq6??????
    Does it do that at stock CPU/ram speed when you game? If so it is likely the driver or card overheating.
    No Sr not fail in stock settings
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  9. #49
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Ya that is the driver you mention that is crashing. If you are using incorrect memory settings or voltage settings in the BIOS that could cause it as well. Did you try the suggested settings I gave you yet for ram and voltages?

    It is not the board, all the settings you are using. P45-DQ6 will need the same correct settings

    Since it does not fail at stock, but does at overclock settings that means your settings are still not correct. You need to try again and get them all set manually for sure

  10. #50
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    My settings--->>
    Test ''other'' multiplier and FAIL... always fail retur to defaukt settings in (1000,1035,1135,1200,) only 1110 works but showme this error :(

    Try whith more ''V'' and NO :(

    Run OK in 333*9 1066---- more OC FAIL in games no in test...

    That I select configuration is it necessary photos? the my bios????

    Tri again whith new driver...

    Thanks

    PD: Try use this setting a ''extreme fail XDD'' mother ''piiiii piiiiii piiiii piiiiii piiii' and off.. :b


    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [425]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.66] = 1130

    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18

    ACT to ACT Delay (tRRD)_________ 3-5
    Rank Write to READ Delay________ 3-6
    Write to Precharge Delay_________ 4-8
    Refresh to ACT Delay______________ 52-65
    Read to Precharge Delay__________ 3-5
    Static tRead Value_______________8-12
    Static tRead Phase Adjust________ [Auto] << Always leave

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V - +0.4] =2.1V -2.2V
    PCI-E OverVoltage Control_ [+0.1V] << For stability
    FSB OverVoltage Control___ [+0.1V] << For stability
    (G)MCH OverVoltage Control [+0.2V - +0.3] << Needed for 2x2 ram
    CPU Voltage Control_______ [1.45-1.50] << Set high because of your vdrop/vdroop, may need more or less all depends on your chip
    Last edited by ADDIER; 10-30-2008 at 03:44 AM.
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


Page 5 of 22 FirstFirst ... 3456715 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •