Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 22 FirstFirst ... 5678917 ... LastLast
Results 61 to 70 of 212

Thread: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide




  1. #61
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Try this 380*8 910 mhz memory, and work GOOD    Because it is better 910 5-5-5-15 vs 1110 ??? WTF   5-5-5-15

    IS the FSB??????? I do not believe that they are 40 Mhz Of the processor :D
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  2. #62
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Well it could be the FSB, or just the ram runs better at slower speed with tighter timings

  3. #63
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.

    Off the PC and enter in bios again.. when try ''move o reset a any value'' BIOS freezes
    ClearCmos and set a ''normal values'' and RUN ok.......

    Because this ???? what is a problem???

    Try again the OC :( Or I forget forever
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  4. #64
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Not sure, glad you got it cleared. You should be fine trying the overclock again.

    Do you defrag your disk often? If not that could be the issue, changing settings and rebooting failures during overclock attempts often mess up the disk so best to defrag your disk often

  5. #65
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Now try my old OC and NOT work.... the bios showme a ''''Pci bad frec ''' and bios freezes..

    Flash my bios????? is damage??

    Show me error and error and error.... and NOT boot sometimes, need return a stock values.. :( :(


    Try 385*8 --->>> FAIL... Before can to achieve it without problems now only FAIL....


    PD: Ok sr clean my HD today thanks 
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  6. #66
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    So you get it working then after your HD?

  7. #67
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    No... FAIl again and again... today flash my bios..... and NOT try up more the core... fail fail fail fail :-( :-(
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  8. #68
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Post me your full settings that are failing and I will see if I can help. And please add your spec's into your signature so I dont have to hunt them down.

  9. #69
    Join Date
    Oct 2008
    Location
    Mexico
    Posts
    36

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Upload photos????

    In night in my house show you my settings.. thanks sr--

    Other settings desactivate--- EIST---MEMORY EXECUTE etc etc ;-)


    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [385]--->>> 3080
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____cant remember -- 924

    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    ACT to ACT Delay (tRRD)_________ 3-5--->> auto
    Rank Write to READ Delay________ 3-6--->>auto
    Write to Precharge Delay_________ 4-8--->>auto
    Refresh to ACT Delay______________ 52-65--->> 52
    Read to Precharge Delay__________ 3-5---->>auto
    Static tRead Value_______________8-12--->>auto
    Static tRead Phase Adjust________ [Auto]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ +4--->>2.200
    PCI-E OverVoltage Control_ AUTO
    FSB OverVoltage Control___ [+0.1V] << For stability
    (G)MCH OverVoltage Control +2
    CPU Voltage Control_______ 1.4250 BIOS--->> System 1.3760 IDLE--->> 1.3440 FULL

    And system RUN Impressive         FAST FAST FAST  in games in test in all aplications---


    But one day ''FAIL'' :( remember -->
    Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.



    Now today try set this settings and system NOT ON...

    Sames settings.. only fail.. show me black screen....
    Last edited by ADDIER; 11-06-2008 at 03:11 AM.
    Q6600 3.0 VID 1.3250
    Vitesta Extreme 1066 5-5-5-15 2X2 gB 2.200
    Xfx 9800 GTX Standard
    2 Seagate 500 Gb 7200.10
    Ga-Ep35-Ds3 F3
    Tx750 Corsair
    Lg dvd ram
    Acer 22''


  10. #70
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

    Maybe add a bit more MCH Voltage see if that helps. To maybe .25 MCH

    And this manaually set >>
    Refresh to ACT Delay______________ 52-65--->> 54

    Static tRead Value_______________8-12--->>8-9

    Can you post me a image of what Auto gives you for all the settings above in Auto with Memset? Thanks >>>
    Tweakers.fr

Page 7 of 22 FirstFirst ... 5678917 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •