Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Motherboard Mystery....

  1. #1
    Join Date
    Mar 2008

    Default Motherboard Mystery....

    i have a gigabyte P35C-DS3R with a q6600 cpu 36gb raptor evga 8600gts 6OO ocz stealthstream and two pioneer 115 ide dvd burners . when both dvd burners are connected as master and slave to the only ide socket the burning fails at about two percent and the system hangs till i force a reboot but if i remove the slave burner the burn goes perfectly.. i am using both nero 7 and imageburn also if i connect my external pioneer burner i also get failures and the burner spits out the disc.. the both burners are dma enabled .. should i replace the two ide pioneers for two sata burners instead... i have tried reinstalling the burning software but with the same results .. does this boards controllers just not like two ide burners ? i have uninstalled the controller drivers and reinstalled them with the same results..thanks in advance....

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

    Default Re: Motherboard Mystery....

    I would first try disconnecting the external one, and then disabling "Legacy USB storage Dectect" in the bios, and then be sure the drives (Internal IDE Only) are seen and set properly in the BIOS and then try one more burn and see if that helps. I would also try them separately as well before going and buying 2 new SATA drives, you may need only 1

    There is another user here also having IDE issues with the same board, so It could be a Board specific issue with IDE

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts