Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: FANIN0 & FANIN1- Call Me Stupid, What It




  1. #1
    2therock's Avatar
    2therock is offline Member
    Join Date
    Mar 2008
    Location
    N. GA US
    Posts
    262

    Default FANIN0 & FANIN1- Call Me Stupid, What It

    Believe me when I say I google and thread search before posting. I just cannot get a plain and clear explanation.

    I just built my first system and it's great. The case came with one fan.
    I just replaced it and added a front fan with Roswill RFX-120 fans.
    They come with cheap little card slot controllers.

    OK, the wiring has Molex, motherboard, and fan connectors. I tried it with just the molex connections and the controllers work fine. The fans can get loud at full speed but are quiet enough to cool good whan I throttle them back. My PC is quieter than my Fridge now. I'm happy.

    Now in hardware monitor there is no indication of the fans or rpm. So I hook up one of the 3-pin wires to Sys1 and the other to Sys2 (both are 3pin). Still not present in hardware monitor. Still running at the speed I set with the controllers.

    So other than the best way to wire these fans up, what the heck is FANIN0 and FANIN1. What are the differences in the sys fans and the power fan connections?

    I ned a Fan setup 101 course.

    Thanks,
    Gigabyte GA-Z77X-UD5H WB Motherboard
    Intel Ivy Bridge i7 3770K clocked @ 4.5GHz
    16GB Kingston Hyper-X Genesis 2133 RAM
    Water cooling by XSPC RASA RS240 Kit
    Sapphire HD 6850 1GB DDR5 GPU
    1TB - RAID1 setup with Western Digital 6GB/Sec Drives
    Corsair HX750W Professional PSU
    Windows 7 Professional (x64) Build 7601

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: FANIN0 & FANIN1- Call Me Stupid, What It

    Did you install the intel .Inf drivers? Just checking

    Does your manual say those fans have a Sense on them? Just because a header has 3 pins doesn't mean it can sense. And what monitor are you using?

    Have you tried everest ultimate trial? Try it and see if you see them in the sensor section

  3. #3
    Join Date
    Jul 2007
    Location
    Taipei, Taiwan
    Posts
    398

    Default Re: FANIN0 & FANIN1- Call Me Stupid, What It

    4 PIN SYSFAN WITH SPEED CNTROL
    3 Pin pwnfan no speed control

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •