Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: GA-P35-DS3 - manual FSB Clock change problem




  1. #11
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    I will check in moment, but why in Auto mode works fine ?

  2. #12
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    On one stick (2GB) works fine (tested every memory socket and both stick - it's OK) - I can change FSB ! :)
    Unfortunetely, on 2 sticks (all possible combinations - Single channel, dual channel) it doesn't work :(
    Last edited by slash83; 04-28-2008 at 11:37 PM.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    Then it sounds like one stick is bad, can you test them both by themselves with memtest86+ and see which it is?

    It still also could be that you do not have the right settings, or that your NB is to hot. Can you touch it for more then 10 seconds?

  4. #14
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    Both sticks are OK. Singli on every memory slot works fine, but i can't use two at once (Single Channel and Dual Channel).

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    Well then you likely still are not trying the right settings or you NB is getting too hot. can you touch it for more then 10 seconds after 2 sticks have been in there running not overclocked?

    If not, then you need a Fan on it, and or new thermal paste (Which I suggest either way) mine was only partially covered, and that was way to thick as well

  6. #16
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    This is my RAM: OCZ Technology | Products | Memory | OCZ DDR2 PC2-6400 Titanium 4GB Edition Dual Channel

    After 14h computer's working, sticks is only lightly warm - cooling is OK.

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  8. #18
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    North Bridge is warmer than the memory, but isn't hot.

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    If you can hold your fingers on it for 10 or more seconds after running some memory tests then you should be fine and just likely need to adjust your timings a bit more if you are still having issues. Now this test it only good to feel it after you run some memory intensive tests such as orthos or memtest86+ for a half hour or so then very quickly or with your pc on and case open feel it

  10. #20
    Join Date
    Apr 2008
    Posts
    11

    Default Re: GA-P35-DS3 - manual FSB Clock change problem

    Yes, I have the solution! I must to disabled in BIOS "USB Mouse support" option ! No I can manually change FSB and computer works fine !

    Thanks !

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •