Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Problem with PCIE bus on overclock of 965P-DS3




  1. #1

    Default Problem with PCIE bus on overclock of 965P-DS3

    I just overclocked my E660 on my Gigabyte 965P-DS3 mobo. When I did this my EVGA 7900 GS went from running at x16 link width to x1. I messed around with it, and got it back to x16 by raising the frequency to 105, but I'm not sure that this is healthy for my graphics card. I'm running the latest non-beta bios for it. Any suggestions.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem with PCIE bus on overclock of 965P-DS3

    That is fine, anything between 102-112 I use. Have you tried 100 since? And do you have +0.1 added to MCH and PCI-E if not do that and go back and try 100-101

    Also, when you did flash to the latest bios, did you load optimized defaults then save and apply and reboot? If not you MUST do that, so I would suggest doing the flash again if you did not do that before

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •