Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors




  1. #1
    Join Date
    May 2008
    Posts
    4

    Default GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    I bought a new pc with a new GA-EP35-DS3 board and
    2 modules of kingston ddr2 800Mhz CL5 memory (KVR800D2N5/1G)
    Before windows install i ran Microsoft memory diagnose tool and it
    showed me that this tests failed:
    WMATS+ Failed
    WINVC Failed
    MATS+ Failed
    LRAND Failed
    INVC Failed

    What can be the problem here?
    The memory? The board bios?
    I have F1 BIOS version.
    What should I do?
    Thanks in advance.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    What settings are you using in the MIT section? That is likely the cause. Copy and past back your settings, and what CPU you have >>>

    Just a template I use to ask people there settings, pay no attention to the numbers in it, replace with yours

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [102]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    Performance Enhance = [Standard]

    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ 1-31

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.25]

  3. #3
    Join Date
    May 2008
    Posts
    4

    Default Re: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    I have E8200 CPU 2.66Ghz 1333 Mhz FSB

    Robust Graphics Booster [Auto]
    CPU Clock Ratio [8x]
    CPU Frequency 2.66GHz (333x8)
    CPU Host Clock Control [Disabled]
    CPU Host Frequency (MHz) [200]
    PCI Express Frequency (Mhz) [Auto]]
    C.I.A. 2 [Disabled]
    System Memory Multiplier [Auto]
    Memory Freq 800 800
    DRAM Timing Selectable [Auto]
    Performance Enhance = [Turbo]

    ***standart timing control***
    5 [auto]
    5 [auto]
    5 [auto]
    18 [auto]
    ***advanced timing control***
    3 [auto]
    3 [auto]
    6 [auto]
    42 [auto]
    3 [auto]
    6 [auto]
    1 [auto]

    System Voltage Control [Manual]
    DDR2 OverVoltage Control [Normal]
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [Normal]
    (G)MCH OverVoltage Control [Normal]
    CPU Voltage Control_______ [Normal]

    Normal CPU Vcore 1.17500V
    Last edited by leda; 05-20-2008 at 04:37 AM.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    You should use the following

    Robust Graphics Booster [Auto]
    CPU Clock Ratio [8x]
    CPU Frequency 2.66GHz (333x8)
    CPU Host Clock Control [Disabled]
    CPU Host Frequency (MHz) [200]
    PCI Express Frequency (Mhz) [100]
    C.I.A. 2 [Disabled]
    System Memory Multiplier [Auto]
    Memory Freq 800 800
    DRAM Timing Selectable [Auto]
    Performance Enhance = [Standard]
    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15

    Leave the rest On Auto for now. Which you are actually not even seeing all of. On the MAIN BIOS screen hit Control + F1 then the screen will flash, then go into MIT and you can see all settings.

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.100V] = 1.9, you ram is 1.8 but 1.9 would be more stable for you, or leave on auto


    And just so you know Windows memory test is garbage, you should be using Memtest86+ V. 2.01 >>>
    Memtest86+ - Advanced Memory Diagnostic Tool

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #6
    Join Date
    May 2008
    Posts
    4

    Default Re: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    maybe i shoul also:
    CPU Host Clock Control [Enabled]
    CPU Host Frequency (MHz) [333]

    ???
    I have 1333Mhz FSB CPU!

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3 AND Kingston 800Mhz CL5 Errors

    Yes, if you want. And >>>
    System Memory Multiplier manual]
    Memory Freq 800 800
    DRAM Timing Selectable [2.40] 2.40x333=800

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •