Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: GA-P35-DS3R -- Need RAM Recommendation




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3R -- Need RAM Recommendation

    Ya, mushkins are rock stable for sure! If you are not using the same exact setup blargh23 is then you could likely use tighter timings if you wanted to play with them abit. If so post your settings you are using now and I will see if anything could be easily lowered

  2. #12
    Join Date
    Jun 2008
    Posts
    7

    Smile Re: GA-P35-DS3R -- Need RAM Recommendation

    Thanks!

    I'm pretty sure I'm using pretty much the same settings, but I'll post anyway in case there's anything obviously outta whack.

    I started out for a couple days on 'stock' settings then moved to a relatively mild OC.

    Clock Ratio 9x
    Host Clock Ctrl Enabled
    CPU Host Freq 333
    PCI Express Freq 100
    CIA2 Disabled
    Perf Enhance Standard
    System Memory Mult 3.20 (for 1066)
    CAS Latency 5
    DRAM RAS# to CAS# 5
    DRAM RAS# Precharge 5
    tRas 15
    tRRD 4
    Rank Write to Read Delay 9
    Write to Precharge 8
    Refresh to ACT Delay 60
    Read to Precharge 4
    Static tRead 8
    Static tRead Phase Adjust Auto
    Voltages
    DDR2 +0.2
    PCI-E +0.1
    FSB +0.1
    MCH +0.1

    If those look reasonably in-line, great, 'cause this thing is rock-solid stable since putting in the Mushkin. Once again, thanks!

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P35-DS3R -- Need RAM Recommendation

    Looks good, have you tried Static tRead 7? Would be a boost if you could get it stable

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •