Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 9 FirstFirst 12345 ... LastLast
Results 21 to 30 of 86

Thread: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS




  1. #21
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Thanks. And no, I am still in the case for now. Had to paint last night. Just bought a house and it is hard to find free time!

    Ill try to set it up on the table tonight.

    Thanks for your help

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Ahh ya I hear that!

    Be sure there is no cats around to get on your table, and do not wear socks and get up and move around alot

  3. #23
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    K thanks.

  4. #24
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Angry Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Now I am just pissed. I finally got around to removing all the components and the damn thing still freezes if I hit any key while posting. Tried USB and PS2 cleared cmos, I have the latest BIOS. Is my board just shot?

    Anyone???!!!

    If I try to use easytune when I attempt to apply any OC changes, pc freezes.

  5. #25
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Angry Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Oh and I also have brand new mushkin memory.

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Can you load a DOS boot disk? Make a DOS boot floppy or USB and then please try flashing to the last older BIOS that supports your CPU. Or please flash again the same one, and then see if you get anywhere.

    Have you tried this with only one stick of ram in slot one?

    You may have something fried somehow that wont let the keyboard load until windows is running, isn't that the case as you said before?

  7. #27
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    I dont have a floppy drive, but I may have a flash drive around somewhere. How would I load the bios from the flash drive? And yes I have tried with one stick of ram.

    Yes same case

  8. #28
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Well you can use a USB stick, it MUST be formatted to FAT32 or FAT16 and you MUST leave it in when you boot. Then you should see it in Qflash it will be shown as a drive or disk though so look thru all that is presented to you.

    You can make a Bootable DOS CD as well incase you were unsure. If you need to know about this let me know.

    And you could also (Since you can load windows correct? I think you said yes) go in windows and make a 1GB partition of FAT32 and put BIOS files there which you can also see in Qflash then as well

  9. #29
    Join Date
    May 2008
    Location
    Ohio
    Posts
    48

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Slightly confused. When I format my usb stick, no matter what I do the option to make bootable is greyed out. How am I getting into qFlash? I tried making a 1 gb fat32 partition earlier and then I tried to boot off my gigabyte cd for xpressrecovery but it didnt seem to want to see my partition. not sure if this matters but I am running raid 0 on the ich9

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Pissed please help GA P35-DS3P 2.0 Cannot enter BIOS

    Here is a tool which will allow you to make a BOOTABLE USB Stick as well (Be sure to grab n add the Win98 Files) Then you can use the DOS flasher. This is all if you do not get Qflash to work with your USB since you cant get in the BIOS you may have some things set to where you wont be able to. After you make the USB Bootable add the Win98 Image and the BIOS files in there as well. Then boot and start DOS and follow the flash directions

    HP USB Disk Storage Format Tool - v2.1.8 Download - EXTREME Overclocking

    Or you could use Hirens BootCD which has tons of flash and Dos tools already built in it

    But the above way of doing it with a 1GB partition would be the fastest and easiest way to Get-R-Done

Page 3 of 9 FirstFirst 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •