Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: GA-EP35-DS3R Raid problem




  1. #1
    Join Date
    Jul 2008
    Posts
    1

    Unhappy GA-EP35-DS3R Raid problem

    Guys, need help. I'm running raid 0 Gigabyte GA-EP35-DS3R board with ICH9R. I oopsed and booted with cmos "default" setting which took it of out Raid. It now says Volume o is "failed" and on member 0 "non-raid" and member 1 "member Disk". I've since changed cmos settings back as it was before(RAID). Still same problem. I know hard drives are good and data is still intact. I searched the web and read for hours but couldn't find a solution. How can I recover my Raid 0 setup.

  2. #2

    Default Re: GA-EP35-DS3R Raid problem

    You can't, sorry. RAID0 splits data in half in order to increase speed but lacks security.
    Usually we use those RAID0 drives only for systems files and crucial data is stored away, securely.
    GA-Z97-D3H Windows Pro 8.1
    i5-4690K + Corsair H90
    Sapphire Radeon R7 240
    16GB (2x8GB) DDR3 Corsair Vengeance Pro 2400MHz PC3 19200
    Corsair CX750M
    Samsung SSD 840 EVO 500 GB

    Sharkoon VS-3V tower

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP35-DS3R Raid problem

    Yeap, if you changed it back and it still fails you are out of luck other then buying RaidReconstructor program

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •