Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 18 of 23 FirstFirst ... 81617181920 ... LastLast
Results 171 to 180 of 224

Thread: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS




  1. #171
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    Ya, I asked him to report that to Felix and he has. Felix said he did not know why it shows zero either, but likely due to something he needs to further correct since he just added support for E-mil's board/bios so that the apply button worked.

    I have NEVER seen it say Zero, that is why I told him to report it to Felix. It should show the set value, an auto value (Sometimes), or be blank. Should not be zero ever.

  2. #172
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    how do I run memtest I get this error when I click the exe file ... you must use normal size 96ppp please help

  3. #173
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    Quote Originally Posted by Lsdmeasap View Post
    I have NEVER seen it say Zero, that is why I told him to report it to Felix. It should show the set value, an auto value (Sometimes), or be blank. Should not be zero ever.
    There was never a zero option there before Felix changed it. When it showed blank the Apply button was disabled, that was his fix.
    Felix didn't say he does not know why it show zero, he said he does not know why it is zero.
    Apparently it can be zero. My P35 ASUS boards has "DRAM Static Read Control" with an option to disable it, maybe zero means disabled.

  4. #174
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    Quote Originally Posted by bathala View Post
    how do I run memtest I get this error when I click the exe file ... you must use normal size 96ppp please help
    You need to get the latest version, I do think he changed the DPI requirement. If not, you will have to change your DPI back to normal instead of large.

    Here is the latest version, try this
    http://www.tweakers.fr/download/MemSet41b9.zip

    Or try the latest (older) beta posted here
    Tweakers.fr


    Quote Originally Posted by Chike View Post
    There was never a zero option there before Felix changed it. When it showed blank the Apply button was disabled, that was his fix.
    Felix didn't say he does not know why it show zero, he said he does not know why it is zero.
    Apparently it can be zero. My P35 ASUS boards has "DRAM Static Read Control" with an option to disable it, maybe zero means disabled.
    That is likely, zero is just disabled. B2B write back cache shows disabled though when it is disabled in CPU-tweaker, that is why I thought it was an error due to his updating to correct the previous issue

  5. #175
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    thank you sir... but yup I still get that error message from my OS
    OS error says: you must use normal size 96ppp to use this software, you want change it office>right click>property>parameters>advanced>general. choose normal size.

    how do I do that? Sorry sooo noob ty in advance

  6. #176
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    thanks I got it now , changed the dpi settings now its running .. next step figure this out thanks so much

  7. #177
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    Then you are using large DPI. Please change this in display properties as shown in this image >>



    Then reboot and it should be good to go. This will make your font smaller, just so you know. You can then increase the font sizes if you want instead, if you need to know about this let me know

  8. #178
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    thanks so much.. I'm good with that now. I'll just put some other questions on the thread I started thanks again you're the best

  9. #179
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    Cool, glad to see you got it figured out! I'll catch up to you on your other thread.

  10. #180
    Join Date
    Dec 2009
    Location
    romania
    Posts
    5

    Default Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS

    hi
    i have the following mother board ga ep-31 ds3l rev 2.1 motherboard with FC bios
    i would like some help in setting the timings for my ram, everything is set on auto in bios. i got 1gb ddr2@800 mhz 5-5-5-18 kingmax(gonna add another 1gb stick this weekend for 2gb)
    thing is that the mem is seen at 533mhz 4-4-4-12 with everthing on auto and its voltage is 1.936, i want to know what to do to make it run at 800mhz, its default speed.
    im running an Intel Celeron D 347@3.06ghz, hd 4650 512ddr2/128 bit
    if you could help me with all the settings(and i mean everything :D), since i dont know anything about this stuff :)
    10x in advance and if u want anymore details pls tell me :)
    p.s. bad thing is that i dont have internet at home untill after newyears, and i can only check this when im at work

    ill add this to if it helps, hope i did it right(where i put an "X" means i dont have that option):
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] X
    Fine Clock Ratio ____________[0.5]X
    CPU Host Clock Control_ [Disabled]
    CPU Host Frequency (MHz)__________ [133]
    PCI Express Frequency (Mhz)_______ [Auto]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [Auto]
    DRAM Timing Selectable_______ SPD __ [Auto]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 4
    Dram RAS# to CAS# Delay_________ 4
    Dram RAS# Precharge Delay_______4
    Precharge Delay (tRAS)__________ 12

    ACT to ACT Delay (tRRD)_________2
    Rank Write to READ Delay________ 2
    Write to Precharge Delay_________ 4
    Refresh to ACT Delay______________ 34
    Read to Precharge Delay__________2
    Static tRead Value_______________4
    Static tRead Phase Adjust________0 [Auto]

    CPU/PCIEX Clock Driving Control [800mV]X
    CPU Clock Skew Control [normal]X
    GMCH Clock Skew Control [Normal]X

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [Normal]
    PCI-E OverVoltage Control_ [Normal]
    FSB OverVoltage Control___ [normal]
    (G)MCH OverVoltage Control [Normal]
    CPU Voltage Control_______ [Normal]
    CPU GTLREF VOLTAGE RATIO=0.636
    Normal CPU Vcore=1.31250V

    Limit CPUID Max. to 3.....................: [Disabled]X
    No-Execute Memory Protect............: [Enabled]X
    CPU Enhanced Halt (C1E)................: [Disabled]X
    C2/C2E State Support....................: [Disabled]X
    x C4/C4E State Support..................: [Disabled]X
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]X
    CPU EIST Function.........................: [Disabled]X
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC - X

    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
    Last edited by costello; 12-18-2009 at 04:51 PM.

Page 18 of 23 FirstFirst ... 81617181920 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 12 users browsing this thread. (0 members and 12 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •