Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 7 FirstFirst ... 34567 LastLast
Results 41 to 50 of 62

Thread: Problems with GA-EP43-DS3L and 2x2GB memory




  1. #41
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    Ya, I wasnt sure after all the comments about this or that type

    If you want settings let me know and post what I asked, if not please do read the memory guide and good luck in tweaking your ram

  2. #42
    Join Date
    Oct 2008
    Posts
    10

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    I think this is a problem with this specific OCZ memory and Gigabyte boards. Don't ask me why, but I am having the same problem getting the PC2-8500 Platinum memory to work on my EP45-UD3P. With one stick installed, it boots fine. With 2 (2x2GB) it just gets stuck in a reboot loop. A little google research and I found I am not the only one dealing with this.

    I am returning my OCZ Platinum memory and trying something else. Fortunately, I got Newegg to waive the restocking fee.

  3. #43
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    I believe it actually. Many DDr3 users have issues as well, and I used to have TONS of compatibility issues with P35 and OCZ. I am trying to get them to ship me some samples but have yet to find out anything

    Ya, Newegg ROCKS!!! Always call in about issues and they will for sure help get things done and waived/cross shipped.

    Get ya some Mushkins and be stable!

  4. #44
    Join Date
    Nov 2008
    Posts
    3

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    hi any chance you could offer me some settings
    running a e8400 wolfdale withOCZ 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 CL 4-4-4-15 PLATINUM on a GA-EP45-DS3L iP45 and 4850 grahpics
    just noticed while going to post my f7 details een though my memory is 4-4-4-15 auto is setting it at 5-5-5-15 will swapping it to the 4-4-4-15 help also upped voltage to 2.1 and mch to
    Last edited by payne_uk; 11-03-2008 at 04:36 AM.

  5. #45
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    8400 at stock speed with ram at 800 CAS4

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3Ghz
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 
    PCI Express Clock Drive.................: <<< 
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333]
    System Memory Multiplier ..............: 2.40
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................15
    
    Advanced Timing Control
    tRRD...........................................3-5
    tWTR..........................................3-6 (May need 12 for first time you set this)
    tWR............................................4-6 (May need 14 for first time you set this)
    tRFC...........................................38-42
    tRTP...........................................3-6
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................800
    
    Channel A
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:7-10
     tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: Auto
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Please set to stock manually
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << Auto
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 2.0-2.1
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  6. #46
    Join Date
    Nov 2008
    Posts
    3

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    hmm sill not to stable when i get the chance will post my f7 figures but do you think changing out the ocz memory would help ? as was considering getting some 2 x 2mb crucial anyway ?

  7. #47
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    It could help, but I bet it is all in your settings. Please do post that back with the exact settings you applied so I can see if maybe you missed something or still have something wrong

  8. #48
    Join Date
    Nov 2008
    Posts
    3

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    to give you the correct numbers is it a cse of just hitting f7 numbers or do i change anything 1st ?

  9. #49
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    You lost me there. To give me what you are using, you write it down then put them in the template and post for me to see

  10. #50
    Join Date
    Dec 2008
    Posts
    3

    Default Re: Problems with GA-EP43-DS3L and 2x2GB memory

    can anyone help me.this is what i see in BIOS
    currently using kingston 2x2GB KVR800D2N5/2G same problem as anyone..

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................: 0
    CPU Frequency ...........................: 3.00Ghz (333x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........: Auto


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: <<< Leave
    MCH Clock Skew (ps)...................: <<< Leave


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................: Auto, reported 5
    tRCD .........................................: Auto, reported 5
    tRP'............................................: Auto, reported 5
    tRAS..........................................: Auto, reported 18

    Advanced Timing Control [Press Enter]
    tRRD...........................................: Auto, reported 3
    tWTR..........................................: Auto, reported 3
    tWR............................................: Auto, reported 6
    tRFC...........................................: Auto, reported 52
    tRTP...........................................: Auto, reported 3
    Command Rate (CMD) ....................:0

    Channel A
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.1875v
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

Page 5 of 7 FirstFirst ... 34567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •