Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 12 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 116

Thread: Gigabyte X48-DQ6 reboot/hang problem




  1. #31
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  2. #32
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    Oh, I'm having a blast. :) Broke a pin off the HS so reverted to the stock HS. Heat is high on initial boot (kicking 60's) but settles to 30's and high 40's after a few minutes. High, but workable. Again, business machine, just occasional gaming machine. Still, the sometimes 10 to 12 degree spread between cores throws me. And constantly bouncing around, not stable. With the last mount, the last two cores (2 & 3) were running hotter, now the two center cores (1 & 2) are running hotter. (I didn't have even close to this much trouble with my old prescott!)

    Hopefully when the grease burns in it will stabilize and drop some more. Added another fan but doesn't seem to phase it so it doesn't look like an air flow problem. I'll probably end up just disconnecting it.

    With the old mushkin... so far, so good. I'll have the new ram mid next week some time and I'll bug you about it then. :)

    In the meantime... film at 11.

  3. #33
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    10-12 temp between cores can mean a few things. One being uneven heatsink base where it contacts the CPU. And second would be uneven or too much paste. And of course there is normally a few 2-6 +/- between cores anyway as both generally are doing something different.

    Get ya a new heatsink soon as you can, Stock ones suck!

  4. #34
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    I agree and if I ever decide to game I probably will.

    However, idleing at hi 30's to hi 40's now. But what throws me... the more I use it, the cooler it runs. I don't mean it's getting cooler the longer it runs. That should be normal. I mean as I push it, it runs cooler. From low 30 to low 40's. Get back to idle and the temp rises.

  5. #35
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    You may just have faulty sensors. Please get RealTemp >>>

    Download >>>
    Real Temp - CPU temperature monitoring

    Calibration (IMPORTANT If you plan to ever use to watch temps!!!) >>>
    Real Temp - Documentation

    And run the Sensor test, this will tell you if you do have faulty sensors, which many CPU's have

  6. #36
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    Seems a vast difference from coretemp. So which is which?
    Attached Images Attached Images Gigabyte X48-DQ6 reboot/hang problem-real-temp-jpg 

  7. #37
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    Ok, 5 minutes later after opening a few programs, core temps showing 41, 42, 33, 34

    sigh

  8. #38
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    And coretemp,which was showing hi 20's to hi 30's, now showing 56, 62, 64, 54.

    WTF?

  9. #39
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    Ok, seems the coretemp settings got jazzed up. No idea if realtemp did it or not. But resetting the coretemp settings to default brought them back to where it was. But for some reason... more stable. Just bouncing +- 1 or 2C which is to be expected.

    Realtemp- 40 41 32 33
    coretemp- 45 37 38 46

    If you notice, the two center cores are now running cooler with coretemp, as before they were running hotter.

    Off to install the new ram.
    Last edited by garyoa1; 09-25-2008 at 01:29 AM.

  10. #40
    Join Date
    Sep 2008
    Posts
    25

    Default Re: Gigabyte X48-DQ6 reboot/hang problem

    Ok, heat aside (ordered a zalman cooler), how's this look?

    Settings Mushkin xp2 9200 4x1 5 5 5 15


    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [10]
    CPU Frequency___________ 2.66 (266x10)
    CPU Host Clock Control_ [Disabled]
    CPU Host Frequency (MHz)__________ [266]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    DRAM Timing Selectable_______ SPD __ [Manual]
    Performance Enhance = [Standard]
    System Memory Multiplier (SPD)____ [4.00] (FSB 266 X Memory Mutli 4.00 = 1064 RAM Freq)
    *************************************************
    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15
    *************************************************
    ACT to ACT Delay (tRRD)_________ 3
    Rank Write to READ Delay________ 3
    Write to Precharge Delay_________ 4
    Refresh to ACT Delay______________ 50
    Read to Precharge Delay__________ 3
    Static tRead Value_______________ 7
    Static tRead Phase Adjust________ Auto << Do not adjust, leave at Zero, 1-31, or Auto
    CMD______________auto
    **************************************************
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    *************************************************
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.30V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [ +0.200V]
    Loadline calibration _______Auto
    CPU Voltage control______________Normal
    Normal CPU vcore__________1.27500v

Page 4 of 12 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •