Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Installing my power LED and Hard Drive Activity Led




  1. #1
    Join Date
    Aug 2008
    Posts
    18

    Default Installing my power LED and Hard Drive Activity Led

    I have a Gigabyte GA-P35-S3G Motherboard and a Rosewill R624-P Case.
    I have hooked up everything right except I cannot get the Power LED and the Hard Drive Activity LED to be hooked up right. All That I have found on the Gigabyte support is that is says what area the pins for the LED connectors are, there are three of them (if I am looking in the correct place), and I need to know which two of them to use and which one is which.
    Please let me know, I would love to get this fixed.
    Thanks

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Installing my power LED and Hard Drive Activity Led

    I hope this helps a little, Two ways I would do it

    Power LED



    Or here is Front panel method Power LED, and Disk LED



    I believe there is 2 Power LED jumpers on your board just incase you want to use separate ones for different settings as they both indicate they can be used for the same 3 separate power states

  3. #3
    Join Date
    Aug 2008
    Posts
    18

    Default Re: Installing my power LED and Hard Drive Activity Led

    Thanks a lot that looks like what I am looking for, I will try out and let you know if there is a problem.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Installing my power LED and Hard Drive Activity Led

    Good luck, Post back if you have any issues. That is your boards manual images so they should be correct. Although They are the same as mine so I think all P35's are the same

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •