Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: (EP45-DS3R) What would be a good setting to come to DDR2-1200?




  1. #11
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    not set anything outside of normal

    I took the PSU, VGA, all memory (4x1gb), and put the jumper in the clear-cmos for several hours, only left the CPU,

    Start with 1gb in slot1 and also did not work ..

    is the motherboard died?
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Sounds like it is. Did you try starting it with each 1GB stick at a time in slot one? Maybe one of them is dead from you trying to overclock them so far... Or all of them? Can you test them on a different board to be sure?

    Do you have other ram to try in your board?\

    Can you also try to start it with NO Hard Drive connected.

    Do you have a floppy already connected? It HAS to be already setup before now. If so you can blind flash the BIOS.

    If not you will need to RMA the board

  3. #13
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    I will try to get another memory test, I am only trying to connect with CPU/VGA/1 MEMO, everything else out

    I have floppy, as I try to get flash bios?
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    The Floppy drive had to be installed already/before now. And set as first boot device.

    If you had one installed like that then you can try this >>>>
    Award 6.0 BIOS - BootBlock Recovery

  5. #15
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Quote Originally Posted by Lsdmeasap View Post
    The Floppy drive had to be installed already/before now. And set as first boot device.

    If you had one installed like that then you can try this >>>>
    Award 6.0 BIOS - BootBlock Recovery
    as I put the floopy first if not the video ??
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    I do not understand?

    But if you mean how to set floppy as first boot device you cannot. That is why I said it had to ALREADY have been set that way before you had this problem

    Sounds like floppy is not a option for you and you will need to RMA the board

  7. #17
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    it tried to follow the tutorial but not satisfied

    RMA is the same way

    thanks for your help
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    YA, it would not work for you since you did not already have your floppy installed and set as first boot device.

    Good luck with your RMA, do you need the RMA page to get started? If so here it is >>>
    RMA

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •