Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: (EP45-DS3R) What would be a good setting to come to DDR2-1200?




  1. #1
    Join Date
    Aug 2008
    Posts
    13

    Question (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    What would be a good setting to come to DDR2-1200?

    Memory Micron D9GMH
    Last edited by gugle; 08-25-2008 at 12:07 PM.
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Please post your Full specs and what speed you are running your CPU at, and I can better help you

  3. #3
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Quote Originally Posted by Lsdmeasap View Post
    Please post your Full specs and what speed you are running your CPU at, and I can better help you
    want to 3600 (450x) | DDR2-1200

    is

    Q6600 (400x8)
    Transcend AxeRam DDR2-800 @ 1066

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 8
    CPU Frequency ...........................: 3200


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter] (copied from another topic)
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: [Auto]
    MCH Clock Skew (ps)...................: [Auto]


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: 400 Mhz
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................: 5
    tRCD .........................................: 5
    tRP'...........................................: 5
    tRAS..........................................: 15

    Advanced Timing Control [Press Enter]
    tRRD...........................................: 3
    tWTR..........................................: 11
    tWR............................................: 6
    tRFC...........................................: 42
    tRTP...........................................: 5
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.50v
    CPU Termination…..... 1.200V*.......: 1.20v
    CPU PLL…………………....1.500V*.......: 1.50v
    CPU Referen.…………....0.755V*.......: [Auto]


    MCH/ICH
    MCH Core…………….....1.100V...........: 1.16v
    MCH Reference….…….0.800V...........; [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.500V............: 1.57v


    DRAM
    DRAM Voltage ……....1.800V............: 2.10v
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    OK Here is what I would start with trying for ram at 1200 and CPU at 3.6

    Have you been trying and failed or just wanted to start trying?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 8
    CPU Frequency ...........................: 3600


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 450
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter] (copied from another topic)
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 150ps
    MCH Clock Skew (ps)...................: 250ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: 400 Mhz
    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ..............: 1197
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................: 5
    tRCD .........................................: 5
    tRP'...........................................: 5
    tRAS..........................................: 15

    May actually just need 666-12 or 666-15 above to boot.

    Advanced Timing Control [Press Enter]
    tRRD...........................................: 3-5
    tWTR..........................................: 11-14
    tWR............................................: 8-12
    tRFC...........................................: 42-50
    tRTP...........................................: 5-6
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value.........................:7 << May need 8 or 9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7 << May need 8 or 9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.50v
    CPU Termination…..... 1.200V*.......: 1.20v
    CPU PLL…………………....1.500V*.......: 1.50v
    CPU Referen.…………....0.755V*.......: [Auto]


    MCH/ICH
    MCH Core…………….....1.100V...........: 1.16v << May need a little bit more
    MCH Reference….…….0.800V...........; [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.500V............: 1.57v


    DRAM
    DRAM Voltage ……....1.800V............: 2.10v
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  5. #5
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Lsdmeasap, I had already tried but without success
    Follow your setup, but when you try to enter the Win of BS

    put all the most you passed me
    and vdimm 2.30v
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Your CPU may not reach 3.6 is why. And with Vdroop you may have a hard time. I am looking now for a mod for you, but not seeing anything good yet

  7. #7
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    Quote Originally Posted by Lsdmeasap View Post
    Your CPU may not reach 3.6 is why. And with Vdroop you may have a hard time. I am looking now for a mod for you, but not seeing anything good yet
    here is stable at 3500mhz (438x8)
    I tried to run with these times with DDR2-1162, but also not satisfied

    you have a good setup for DDR2-1162?
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    If you are sure your CPU is stable then try this, if this fails then either your ram just will not run that high or you need to take the ram out of it so we can be sure your CPU is stable.

    To do that you would set ram to all Auto except the first 4 and use 666-24 on those. If that fails then your CPU is not stable or you need more volts to your ram


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: [Auto]
    CPU Clock Ratio ..........................: 8
    CPU Frequency ...........................: 3500


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 438
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter] (copied from another topic)
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 150ps
    MCH Clock Skew (ps)...................: 250ps

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    (G)MCH Frequency Latch...............: 400 Mhz <<< Also Try 333 here since you are using Higher FSB and 1:1

    System Memory Multiplier ..............: 2.66D
    Memory Frequency (Mhz) ..............: 1165
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................: 5
    tRCD .........................................: 5
    tRP'...........................................: 5
    tRAS..........................................: 15 - 18

    May actually just need 666-12 or 666-15 above to boot. Did you try this? If so you ram just may not do over or close to 1066. What amount of ram is this 2x1 or 2x2

    Advanced Timing Control [Press Enter]
    tRRD...........................................: 3-5
    tWTR..........................................: 11-14
    tWR............................................: 8-12
    tRFC...........................................: 52-65
    tRTP...........................................: 5-6
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value.........................:7 << May need 8 or 9 (try 10-12)
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7 << May need 8 or 9 (try 10-12)
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.50v
    CPU Termination…..... 1.200V*.......: 1.20v
    CPU PLL…………………....1.500V*.......: 1.50v
    CPU Referen.…………....0.755V*.......: [Auto]


    MCH/ICH
    MCH Core…………….....1.100V...........: 1.16v << May need a little bit more. Try 1.3 +
    MCH Reference….…….0.800V...........; [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.500V............: 1.57v


    DRAM
    DRAM Voltage ……....1.800V............: 2.10v << Try 2.2-2.3
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Disabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    Last edited by Lsdmeasap; 08-26-2008 at 12:30 PM.

  9. #9
    Join Date
    Aug 2008
    Posts
    13

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    the motherboard restarted, and now it's more boot
    it turns on or off, On-Off

    I tried clear-cmos, remove the battery, exchange CPU, VGA, but nothing happens.

    is calling and off, and does not emit any beep

    help me
    Sorry my bad English

    Language Tools
    http://www.google.com.br/language_tools?hl=pt-BR

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: (EP45-DS3R) What would be a good setting to come to DDR2-1200?

    What did you do to cause that? None of the above settings should have caused that at all, you sure you did not set Static tRead to low?

    Try unplugging your PSU and Putting a Hard drive or optical Jumper on the Clear CMOS pins for 20+ minutes. Then remove all ram but one stick in slot one. And remove the jumper and plug your PSU back in and start the system

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •