Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 42

Thread: GA-EP43-D3SL crashs




  1. #11
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Thanks again! I'll try this. I don't now that I'll have to change MCH voltage...MCH is NorthBridge, right?

    When I made changes and the system don't boot, how I can load previous setting? Yesterday I have this problem and I hold power button for 3 second and the EP43 flash the backup Bios in main Bios, returning to version F4...

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Yes, MCH is the NB

    So, what do you mean? You cannot load the BIOS at all or windows? If windows please post for me the BIOS settings you are using that is failing

  3. #13
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Quote Originally Posted by Lsdmeasap View Post
    Yes, MCH is the NB

    So, what do you mean? You cannot load the BIOS at all or windows? If windows please post for me the BIOS settings you are using that is failing
    I just a doubt...in my old DFI LanParty, when I try a setting that doesn't and don't boot, I hold a key in keyboard and the motherboard load a safe settings...

  4. #14
    Join Date
    Aug 2008
    Posts
    38

    Arrow Re: GA-EP43-D3SL crashs

    Lsdmeasap, I think that o found the issue.

    I try to boot up the system with a 1066mhz in memory, but every time that I tried this, the system fails. So, I checked the sticker to confirm memory type. Is a G.Skill PC8000 5-5-5-15 2.0v~2.1v.

    So, after this check I run MemTestX86+. Bingo! Memory module have problems (in 17 minutes, memtest returned 262 errors) running at 800mhz.

    I'll send memory to RMA...


    Thanks a lot for your help!

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Well PC28000 is only 1000Mhz not 1066MHz

    And errors could come from your settings. So you would want to be using >>>
    System Memory Multiplier ..............: [3.00] = 999 Ram Freq

    Try that before you RMA

  6. #16
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Quote Originally Posted by Lsdmeasap View Post
    Well PC28000 is only 1000Mhz not 1066MHz

    And errors could come from your settings. So you would want to be using >>>
    System Memory Multiplier ..............: [3.00] = 999 Ram Freq

    Try that before you RMA
    Can be my setting even when I running MemTestx86 with memory at 800mhz?

    In my settings don't have 3.00...only 2.40 and 3.20...

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Then you are going to need to either run the ram slower, change your FSB and CPU mutli or use a different MCH strap that will have a correct 1000 Multi

    There is many ways you can do that easily >>>
    (G)MCH Frequency Latch...............: [333 or 400] <<< using different ones will give different Memory Multi's

    You can also use 8 or 8.5 for your CPU Multi and then not need to use 3.0 for ram multi, but the easiest way to get around this would be to overclock to 3.74.

    3.74
    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................:.0.0
    CPU Frequency ...........................: 3.60Ghz (416 x 9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 416 Mhz

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: [2.40] = 998 Ram Freq
    Memory Frequency (Mhz) ..............: 998MHz
    DRAM Timing Selectable ................: [Manual]

    Or 3.36 >>>

    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 8X
    Fine CPU Clock Ratio.....................:.0.0
    CPU Frequency ...........................: 3.36Ghz (420 x 8)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 420 Mhz

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: [2.40] = 1008 Ram Freq
    Memory Frequency (Mhz) ..............: 1008MHz
    DRAM Timing Selectable ................: [Manual]

    Or 3.54

    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 8X
    Fine CPU Clock Ratio.....................:.0.5
    CPU Frequency ...........................: 3.536Ghz (416 x 8.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 416 Mhz

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [400]
    System Memory Multiplier ..............: [2.40] = 998 Ram Freq
    Memory Frequency (Mhz) ..............: 998MHz
    DRAM Timing Selectable ................: [Manual]

    But again if you want to leave things as they are, since you do not have MCH latch set you will need to set it to 333 or 400 and see which has the 3.2 multi, I think 400 does

  8. #18
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Thanks Lsdmeasap! I will try this...

    But memory running at 800 the memtest should be running fine, ins't? This is a symptoms of memory fails, no?

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Well not always. Running it underclocked at 800 will need some settings changed. Post what you are using now and I will see if I see any issues.

    If not then yeah it could be DOA ram

  10. #20
    Join Date
    Aug 2008
    Posts
    38

    Arrow Re: GA-EP43-D3SL crashs

    I tried the settings, but the maximum is 398, more of this, the system don't boot up. I made some tests and looks that when memory run over 800, the system doens't boot up...

Page 2 of 5 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •