Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: GA-EP43-D3SL crashs




  1. #1
    Join Date
    Aug 2008
    Posts
    38

    Default GA-EP43-D3SL crashs

    Hi people! I'm new in forum. I need a help...please.

    I own an GA-EP43-D3SL. I installed Windows Vista X64, its Ok. I run a lot of games and softs and everuthing is Ok, but when I try to make an splitstream with Vista e SP1 using vLite soft, the system crashs and i get BSOD...

    Can be memory problem?

    Thanks!

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Yes, please post your full specs. And what ISO app are you using to burn this dvd with?

    This is Just a template I use to ask people there settings, pay no attention to the numbers in it, replace with yours

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:
    CPU Clock Ratio ..........................:
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< Leave
    PCI Express Clock Drive.................: <<< Leave
    CPU Clock Skew (ps)....................: <<< Leave
    MCH Clock Skew (ps)...................: <<< Leave


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:
    Memory Frequency (Mhz) ..............:
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................

    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7-10
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: <<
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  3. #3
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Thanks for answer. I'm not burning DVD yet, I just triying to slip stream the SP1 of Vista Ultimate X64 to later generate ISO to burn, but the system crashs before I can make a ISO, in merge of SP1 e Vista CD...

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Ahh OK I got ya then. So it is Vlite that crashes then right?

    Please post the settings you are using in the MIT section.

  5. #5
    Join Date
    Aug 2008
    Posts
    38

    Default Re: GA-EP43-D3SL crashs

    Quote Originally Posted by Lsdmeasap View Post
    Ahh OK I got ya then. So it is Vlite that crashes then right?

    Please post the settings you are using in the MIT section.
    Yes, when Vlite is doing a lot a process (merge SP1 with Vista CD), Windows Vista crashs, leaving to a blue screen of death.

    My MIT are all default values, because I have updated BIOS to F7 and used LOAD OPTIMAL VALUES option. The Processor is running at 9 x 333 (Core2Duo E8400) memory in 5:6, vdimm 2.1v and PCI-E in 100mhz (I fallow your advise in your post).

    Thanks for your atention Lsdmeasap.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Can you please post your full specs then and I will give you some settings to try. Auto or Default is not suggested to run your system with, just to get it started so you can go in the BIOS and make the needed changes.

    I suspect you need to make some Ram changes for sure, and depending on your ram set (2x1 or 2x2) likely some voltage changes

  7. #7
    Join Date
    Aug 2008
    Posts
    38

    Thumbs up Re: GA-EP43-D3SL crashs

    Quote Originally Posted by Lsdmeasap View Post
    Can you please post your full specs then and I will give you some settings to try. Auto or Default is not suggested to run your system with, just to get it started so you can go in the BIOS and make the needed changes.

    I suspect you need to make some Ram changes for sure, and depending on your ram set (2x1 or 2x2) likely some voltage changes
    Ok Lsdmeasap! I will see the settings at home and I'll post here. The setting of Ram tha I remember:

    Using 2 x 2GB DDR2 1066 G.Skill
    The timing is set to 5 - 5 - 5 -15 (the timing of label in memory sticker), running at 5:6 of CPU at 533mhz@1066 DDR, with 2.1 vDimm.

    Thanks!

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Ok well fill in the above template when you get home and I will see if I see anything that is set wrong.

    Likely you just need some trfc changes and MCH voltage adjustments

  9. #9
    Join Date
    Aug 2008
    Posts
    38

    Arrow Re: GA-EP43-D3SL crashs

    My settings:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................:.0.0
    CPU Frequency ...........................: 3.00Ghz (333 x 9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........: 100


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Auto]
    Memory Frequency (Mhz) ..............: 800mHZ
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15


    Advanced Timing Control
    tRRD........................................... AUTO
    tWTR.......................................... AUTO
    tWR............................................ AUTO
    tRFC........................................... AUTO
    tRTP........................................... AUTO
    Command Rate (CMD) ....................: AUTO

    Channel A
    Static tRead Value.........................:AUTO
    tRD Phase0 Adjustment...................:AUTO
    tRD Phase1 Adjustment...................:AUTO
    tRD Phase2 Adjustment .................:AUTO
    tRD Phase3 Adjustment..................:AUTO
    Trd2rd(Different Rank)....................: AUTO
    Twr2wr(Different Rank)...................: AUTO
    Twr2rd(Different Rank)...................: AUTO
    Trd2wr(Same/Diff Rank)..................: AUTO
    Dimm1 Clock Skew Control...............: AUTO ps
    Dimm2 Clock Skew Control...............: AUTO ps

    Channel B
    Static tRead Value.........................:AUTO
    tRD Phase0 Adjustment...................:AUTO
    tRD Phase1 Adjustment...................:AUTO
    tRD Phase2 Adjustment .................:AUTO
    tRD Phase3 Adjustment..................:AUTO
    Trd2rd(Different Rank)....................: AUTO
    Twr2wr(Different Rank)...................: AUTO
    Twr2rd(Different Rank)...................: AUTO
    Trd2wr(Same/Diff Rank)..................: AUTO
    Dimm1 Clock Skew Control...............: AUTO ps
    Dimm2 Clock Skew Control...............: AUTO ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: AUTO (1.225v)
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: << AUTO (1.100v)
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.100v
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    I have an Core2Duo E8400, 2 x 2GB DDR2 G.SKILL (5-5-5-15/ 2 ~2.1)@1066.

    I think memory have his clock wrong, no? only 800...I'm just trying to do a stable setting without overclock...

    Thanks a lot!!


    <!-- / message --><!-- sig -->

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-D3SL crashs

    Yeah that is wrong for your ram. Here try these settings >>>>

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: AUTO
    CPU Clock Ratio ..........................: 9X
    Fine CPU Clock Ratio.....................:.0.0
    CPU Frequency ...........................: 3.00Ghz (333 x 9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........: 100


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 800mV
    CPU Clock Skew (ps)....................: 0ps
    MCH Clock Skew (ps)...................: 0ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [333] << You can test 400 later if you like
    System Memory Multiplier ..............: [3.20] = 1065 Ram Freq
    Memory Frequency (Mhz) ..............: 1065MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Set to highest ranges below and move one at a time lower testing after each move. If you do not have the patience to do this, you can leave them all on AUTO. But I do suggest you at least set and test and lower the trfc one until you find it unstable, then raise back up one. In parentheses is the better range, if you can get there stable, if not 52-62 will be fine

    Advanced Timing Control
    tRRD........................................... AUTO
    tWTR.......................................... AUTO
    tWR............................................ AUTO
    tRFC........................................... (48-50 Best after tweaking) 52 -62
    tRTP........................................... AUTO
    Command Rate (CMD) ....................: 2

    Channel A
    Static tRead Value.........................:7-10 (likely best would be 7-8)
    tRD Phase0 Adjustment...................:AUTO
    tRD Phase1 Adjustment...................:AUTO
    tRD Phase2 Adjustment .................:AUTO
    tRD Phase3 Adjustment..................:AUTO
    Trd2rd(Different Rank)....................: AUTO
    Twr2wr(Different Rank)...................: AUTO
    Twr2rd(Different Rank)...................: AUTO
    Trd2wr(Same/Diff Rank)..................: AUTO
    Dimm1 Clock Skew Control...............: AUTO ps
    Dimm2 Clock Skew Control...............: AUTO ps

    Channel B
    Static tRead Value.........................:7-10 (likely best would be 7-8)
    tRD Phase0 Adjustment...................:AUTO
    tRD Phase1 Adjustment...................:AUTO
    tRD Phase2 Adjustment .................:AUTO
    tRD Phase3 Adjustment..................:AUTO
    Trd2rd(Different Rank)....................: AUTO
    Twr2wr(Different Rank)...................: AUTO
    Twr2rd(Different Rank)...................: AUTO
    Trd2wr(Same/Diff Rank)..................: AUTO
    Dimm1 Clock Skew Control...............: AUTO ps
    Dimm2 Clock Skew Control...............: AUTO ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: AUTO (1.225v)
    CPU Termination…..... 1.200V*.......: <<< Leave
    CPU PLL…………………....1.500V*.......: <<< Leave
    CPU Referen.…………....0.755V*.......: <<< Leave
    CPU Reference2………,,0.800V*.......:<<< Leave

    MCH/ICH
    MCH Core…………….....1.100V...........: << AUTO (1.100v) Set to 1.2, may need 1.3 for 2x2GB
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.100v
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •