Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 11 FirstFirst ... 7891011 LastLast
Results 81 to 90 of 103

Thread: X48T-DQ6 issues with TW3X4G1800C8DF




  1. #81
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Im trying Static tRead value 12 as suggested from you...........and the volts, i uselly add +0,40 to the memory and im trying 14000-1.45000 sometimes on vcore volts

    Ye i think it would be possible to OC something hehehe, ive read people, even in rewiews had a hell to make the board OC, they manage to do it, but it wasnt easy.

    So maybe its some settings make trouble with me.......im pretty amazed that you still have the time and power to care about this. Im happy you exists, and i have recommended you to many friends around, belive me

    Thank you!

  2. #82
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Do you have any secure beginning settings i could try that would work for sure. Im thinking of memory settings so exact it could be and voltage for all the stuff........what should i begin with, if i try one thng at the time, maybe i ca solve what the problem is.

    And do you know all the things i should disable in the bios? Like eist and so............is there other settings i should turn off that maybe is the problem.

    I think its the incorrect memory settings thats the problem, i dont really know what to try
    I want to run like 2,70ghz or 3.00ghz its enough

  3. #83
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    So any ideas abut memory settings....tread and such??

  4. #84
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Sorry, I have been gone alot the past few days

    For overclocking you want to disable EIST and C1E.

    Please post me exactly what you are using now, and I will advise you for 2.8 or 3.0 if you want. And please tell me the ram speed you would like to run >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ ?
    Dram RAS# to CAS# Delay_________ ?
    Dram RAS# Precharge Delay_______?
    Precharge Delay (tRAS)__________ ?
    
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ [Auto]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB

  5. #85
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Hello i wanna run the memory in like 1333 or 1600 thats completelly enough) and processor in 2,70-3.0ghz.

    And for the settings, im running stock.........no OC what so ever......only thing i manage to do was change timings for the memory im running 6-6-6-15 right now.........i was trying 5-5-5-15 but i got a bluscreen then hehehehe. I dont now if i have to rise vcore when tigting timings?????

    So the settings i cant give you because there arent any......everything is at stock besides memory (6-6-6-15) Thanks

    Try to be as precise you can with memory settings......you told me something earlyer about some memory setting thing you thought could be the problem....t-read something.....maybe thats the problemo with it all i dont know.
    We take it from scratch:)
    Last edited by keuz; 10-11-2008 at 05:55 PM.

  6. #86
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Ok, try this for 3Ghz
    Code:
    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [9] 
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [4.00] = 1333 Ram speed
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 7
    Dram RAS# to CAS# Delay_________ 7
    Dram RAS# Precharge Delay_______7
    Precharge Delay (tRAS)__________ 20
    
    
    If you have issues with the below timings you can leave on auto until you get going anf have time to tweak things
    ACT to ACT Delay (tRRD)_________4-7
    Rank Write to READ Delay________ (8-14)15-22
    Write to Precharge Delay_________ 9-12
    Refresh to ACT Delay______________65-80
    Read to Precharge Delay__________ 9-12
    Static tRead Value_______________ 10-14
    Static tRead Phase Adjust________ [Auto] << Always leave on Auto
    
    System Voltage Control____ [Manual]
    DDR3 OverVoltage Control__ [+0.400V] = 1.9 may only need 1.8 for 1333 speeds, if timings are not too tight 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] << May need .15 or .2
    CPU Voltage Control_______ [1.40-1.50] << May need less or more, only you and your chip can decide
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  7. #87
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    So here we are again at square 1........................and all is the same.....

    I tryed your settings, both Auto timings and the sugested (hell no)

    G MCH......+0.1....+1.50 and 2 (hell no)

    Cpu voltage from....1,35000 up to 1.5....................absolutelly nooooooo

    i choosed 4.00B strap on the memorys..........but still no......It dies boots up dies and boots up, and stock.....i tryed different settings with volt but its all the same.
    Something must be broken here......maybe next time i wont be choosing gigabyte.....this bios they had arent any good, im very dissapointed on them!

  8. #88
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Please post the full table of setting you used, so I can be sure. Just so you know, it is the ram not the board. Those are not on the QVL, so you may always have issues.

    You should have just left it alone where you had it I guess. Not the board though at all, just the ram. I know that is hard to swallow since you paid WAY to much $$ for DDR3, but that is the problem

  9. #89
    Join Date
    Sep 2008
    Posts
    49

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [9]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [333]
    PCI Express Frequency (Mhz)_______ [100] (No i didnt forget)
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [4.00] = 1333 Ram speed (4.00B)
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time________________ 7
    Dram RAS# to CAS# Delay_________ 7
    Dram RAS# Precharge Delay_______7
    Precharge Delay (tRAS)__________ 20


    If you have issues with the below timings you can leave on auto until you get going anf have time to tweak things
    I Also tryed everything on AUTO
    ACT to ACT Delay (tRRD)_________4-7 (7)
    Rank Write to READ Delay________ (8-14)15-22 (22)
    Write to Precharge Delay_________ 9-12 (12)
    Refresh to ACT Delay______________65-80 (80)
    Read to Precharge Delay__________ 9-12 (12)
    Static tRead Value_______________ 10-14 (14)
    Static tRead Phase Adjust________ [Auto] << Always leave on Auto

    System Voltage Control____ [Manual] Choosed 1.9v
    DDR3 OverVoltage Control__ [+0.400V] = 1.9 may only need 1.8 for 1333 speeds, if timings are not too tight
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V] << May need .15 or .2(tryed all of them)
    CPU Voltage Control_______ [1.40-1.50] << May need less or more, only you and your chip can decide
    Tryed 1.40 and 1.50v

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]</pre>

  10. #90
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X48T-DQ6 issues with TW3X4G1800C8DF

    try 888-24

    This user bought 1333 Corsairs so maybe you can get her to post what she is using for 1333 speeds >>>
    http://forums.tweaktown.com/f69/x48t...25/index2.html

    If it was me I would have RMA'd them along time ago. They are 1800 speed and will not even do 1333

Page 9 of 11 FirstFirst ... 7891011 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •